Ks0250 keyestudio NANO IO Shield
File:KS0250.png
Keyestudio UNO R3 Board
Introduction
This is a simple and small NANO IO shield. It breaks out all the pins of keyestudio Nano ch340, easy to hook it up to make experiments. Onboard comes with two 3mm fixed holes, convenient to fix the shield on other objects.
Parameters
- Terminal block spacing: 3.5mm
- Female header pitch: 2.54mm
Controller Compatible
Technical Details
- Dimensions: 53mm x 36mm
- Weight: 20.5g
PINOUT
Those interfaces marked red line are connected.
Example Use
Stack the NANO CH340 onto the shield, and upload well the code, you could power the Nano ch340 via VIN GND interface to light up an external LED.
