View source for CZ0565 Keyestudio Start and development of electronics Arduino UNO Rev3 compatible

<br>

== '''KEYESTUDIO UNO BOARD''' ==
<br>
Start and development of electronics Arduino UNO Rev3 compatible kit walks you through the basics of using the Arduino in a hands-on way. You'll learn through building several creative projects. 
<br><br>
The kit includes a selection of the most common and useful electronic components with a book of 21 projects. Starting the basics of electronics, to more complex projects, the kit will help you control the physical world with sensors and actuators.
<br><br>
[[File:CZ0565.1.png|500px|frameless|thumb]]<br><br>
keyestudio Uno R3 is a microcontroller board based on the ATmega328, fully compatible with ARDUINO UNO REV3. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz quartz crystal, a USB connection, a power jack, 2 ICSP headers and a reset button. 
<br><br>
It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. Note that the two ICSP headers are separately used to program the firmware to ATMEGA16U2-MU and ATMEGA328P-PU, but generally the two chips have been correctly programmed. 
<br><br>
Keyestudio Uno R3 features the Atmega16U2 programmed as a USB-to-serial converter. The UNO is the best board to get started with electronics and coding. 
<br><br>
If this is your first experience tinkering with the platform, the UNO is the most robust board you can start playing with.
<br>
[[File:CZ0565.2.png|500px|frameless|thumb]]<br>
<br>

== '''KIT MATERIAL LIST''' ==
<br>
[[File:CZ0565.KIT.1.png|500px|frameless|thumb]]<br>
[[File:CZ0565.KIT.2.png|500px|frameless|thumb]]<br>
[[File:CZ0565.KIT.3.png|500px|frameless|thumb]]<br>
[[File:CZ0565.KIT.4.png|500px|frameless|thumb]]<br>
<br>

== '''PROJECT LIST''' ==
<br>
=== '''10 Projects''' ===
Project 1: Hello World<br>
Project 2: LED blinking<br>
Project 3: Button-controlled LED<br>
Project 4: Active buzzer<br>
Project 5: Analog Value Reading (Potentiometer)<br>
Project 6: PWM - Pulse Width Modulation<br>
Project 7: Infrared Remote/Communication<br>
Project 8: Module LCD Display 16x02<br>
Project 9: SG90 Servo Motor<br>
Project 10: 5V Stepper Motor<br>
<br>
=== '''21 Projects''' ===
Project 1: Hello World<br>
Project 2: LED blinking<br>
Project 3: Traffic light<br>
Project 4: LED chasing effect<br>
Project 5: Button-controlled LED<br>
Project 6: Active buzzer<br>
Project 7: Passive buzzer<br>
Project 8: Analog Value Reading (Potentiometer)<br>
Project 9: PWM - Pulse Width Modulation<br>
Project 10: Photocell Sensor (LDR Light Sensor)<br>
Project 11: Flame sensor<br>
Project 12: LM35 Temperature Sensor<br>
Project 13: Tilt switch<br>
Project 14: Infrared Remote/Communication<br>
Project 15: 74HC595 - Shift Register<br>
Project 16: 1-digit LED segment display<br>
Project 17: 4-digit LED segment display<br>
Project 18: LED matrix 8x8<br>
Project 19: Module LCD Display 16x02<br>
Project 20: SG90 Servo Motor<br>
Project 21: 5V Stepper Motor<br>
<br>
== '''RESOURCE''' ==
<br>
SOFTWARE DOWNLOAD: https://www.arduino.cc/en/software
<br><br>
DETAILED TUTORIAL: https://fs.keyestudio.com/CZ0565
<br><br>