Ks0141 keyestudio DRV8825 stepper motor driver for 3D printer: Difference between revisions
Keyestudio (talk | contribs) No edit summary |
Keyestudio (talk | contribs) No edit summary |
||
Line 15: | Line 15: | ||
* Over-temperature thermal shutdown, over-current shutdown, and under-voltage lockout; | * Over-temperature thermal shutdown, over-current shutdown, and under-voltage lockout; | ||
* Short-to-ground and shorted-load protection. | * Short-to-ground and shorted-load protection. | ||
==Resources == | |||
'''PDF File:''' <br> | |||
https://drive.google.com/open?id=1PQ6wB2fxarPST5ngEtnCKmGUWVfvQELS | |||
== Buy From == | == Buy From == | ||
'''Official Website''' | |||
http://www.keyestudio.com/keyestudio-5v-4-phase-stepper-motor-driver-board-uln2003-for-arduino.html | http://www.keyestudio.com/keyestudio-5v-4-phase-stepper-motor-driver-board-uln2003-for-arduino.html | ||
[[Category:Module]] | [[Category:Module]] |
Revision as of 16:07, 15 November 2017
Introduction
The DRV8825 stepper motor driver carrier is a breakout board for TI’s DRV8825 microstepping bipolar stepper motor driver. The module has a pinout and interface that are nearly identical to those of our A4988 stepper motor driver carriers, so it can be used as a higher-performance drop-in replacement for those boards in many applications.
The DRV8825 features adjustable current limiting, over-current and over-temperature protection, and six microstep resolutions (down to 1/32-step). It operates from 8.2-45V and can deliver up to approximately 1.5A per phase without a heat sink or forced air flow (rated for up to 2.2 A per coil with sufficient additional cooling).
Specification
- Suitable for driving stepper motors within 8.2V~45V 2.5A;
- Simple step and direction control interface;
- Six different step resolutions: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step;
- Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor’s rated voltage to achieve higher step rates
- Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay);
- Over-temperature thermal shutdown, over-current shutdown, and under-voltage lockout;
- Short-to-ground and shorted-load protection.
Resources
PDF File:
https://drive.google.com/open?id=1PQ6wB2fxarPST5ngEtnCKmGUWVfvQELS
Buy From
Official Website
http://www.keyestudio.com/keyestudio-5v-4-phase-stepper-motor-driver-board-uln2003-for-arduino.html