Ks0421 Keyestudio micro:bit TEMT6000 Light Module: Difference between revisions

From Keyestudio Wiki
Jump to navigation Jump to search
(Created page with "This keyestudio TEMT6000 light module is fully compatible with micro:bit control board. It is mainly composed of a highly sensitive visible light sensitive (NPN type) triode....")
 
 
(7 intermediate revisions by the same user not shown)
Line 1: Line 1:
This keyestudio TEMT6000 light module is fully compatible with micro:bit control board.
 
It is mainly composed of a highly sensitive visible light sensitive (NPN type) triode.
[[image:Ks0421-1.png|thumb|300px|right|keyestudio TEMT6000 Light Module For BBC micro:bit]]
When using, connect the module to micro:bit control board using Crocodile clip line.
 
There are total 6 rings on the module. Note that two G rings, two V rings and two S rings are connected. G for ground; V for 3V; S for signal pin(0 1 2).
<br>
==Description==
This keyestudio TEMT6000 light module is fully compatible with micro:bit control board. <br>
This module is mainly composed of a highly sensitive visible photocell (NPN type) triode, which can magnify the captured tiny light illumination changes by about 100 times, and is easily recognized by the microcontroller for AD conversion. <br>
Its response to visible light illumination is similar to that of the human eye, so that can detect the intensity of ambient light.<br>
There are total 6 rings on the module. Note that two G rings, two V rings and two S rings are connected. G for ground; V for 3V; S for signal pin(0 1 2).<br>
It is an analog signal output device.<br>
When using, connect the module to micro:bit control board using Crocodile clip line.<br>
You can use it to detect the ambient light intensity by reading the analog value of signal pin.
You can use it to detect the ambient light intensity by reading the analog value of signal pin.
<br>
<br>
== Technical Parameters ==
* Working voltage: DC 3.0-3.3V
* Output Signal: Analog signal
* Dimensions: 31mm*27mm*2.5mm
* Weight: 1.7g
* Environmental attributes: ROHS
<br>[[File:Ks0421-2.png|450px|frameless|thumb]]<br>
<br>
== Connection Diagram==
[[File:Ks0421-3.png|500px|frameless|thumb]]<br>
<br>
== Source Code ==
[[File:Ks0421-4.png|600px|frameless|thumb]]<br>
<br>
== Example Result ==
Connect well the module, then send the source code to the micro:bit main board.<br>
You should see the LED matrix show the rolling dot. Or you can open the serial monitor of Arduino IDE to see the analog value of light intensity.<br>
The stronger the ambient light intensity, the greater the analog value is.
<br>[[File:0421图片3.png|600px|frameless|thumb]]<br>
<br>[[File:0421图片4.png|600px|frameless|thumb]]<br>
<br>
==Resources ==
*'''Download relevant datasheet and code:
''' https://fs.keyestudio.com/KS0421
* [http://microbit.org/  BBC micro:bit website ] <br>
* [https://makecode.microbit.org/  Micro:bit MakeCode Block Editor ]<br>
* [http://microbit.org/guide/  Meet micro:bit starter programming] <br>
* [http://microbit.org/guide/features/    BBC micro:bit Features Guide ] <br>
* [http://microbit.org/guide/features/    BBC micro:bit Safety Warnings ] <br>
* [http://microbit.org/guide/quick/  BBC micro:bit Quick Start Guide ]  <br>
* [http://microbit.org/guide/hardware/pins/  BBC micro:bit Pins ]
<br>
==Get One Now==
*[https://www.aliexpress.com/store/product/keyestudio-TEMT6000-Light-Module-For-BBC-micro-bit/1452162_32997073205.html?spm=2114.12010611.8148356.11.3f896c0eHzY5BG  Shop on aliexpress ]
*[https://www.keyestudio.com/keyestudio-temt6000-light-module-for-bbc-microbit-p0538-p0538.html  Official website]
[[Category: Micro:bit]]

Latest revision as of 11:06, 4 March 2021

keyestudio TEMT6000 Light Module For BBC micro:bit


Description

This keyestudio TEMT6000 light module is fully compatible with micro:bit control board.
This module is mainly composed of a highly sensitive visible photocell (NPN type) triode, which can magnify the captured tiny light illumination changes by about 100 times, and is easily recognized by the microcontroller for AD conversion.
Its response to visible light illumination is similar to that of the human eye, so that can detect the intensity of ambient light.

There are total 6 rings on the module. Note that two G rings, two V rings and two S rings are connected. G for ground; V for 3V; S for signal pin(0 1 2).
It is an analog signal output device.
When using, connect the module to micro:bit control board using Crocodile clip line.
You can use it to detect the ambient light intensity by reading the analog value of signal pin.

Technical Parameters

  • Working voltage: DC 3.0-3.3V
  • Output Signal: Analog signal
  • Dimensions: 31mm*27mm*2.5mm
  • Weight: 1.7g
  • Environmental attributes: ROHS


thumb


Connection Diagram

thumb


Source Code

thumb


Example Result

Connect well the module, then send the source code to the micro:bit main board.
You should see the LED matrix show the rolling dot. Or you can open the serial monitor of Arduino IDE to see the analog value of light intensity.
The stronger the ambient light intensity, the greater the analog value is.
thumb

thumb

Resources

  • Download relevant datasheet and code:

https://fs.keyestudio.com/KS0421



Get One Now