KS0150 Keyestudio RAMPS1.4 / 2004 LCD Control Panel for 3D Printer

From Keyestudio Wiki
Jump to navigation Jump to search


thumb


Introduction

The smart control panel includes a SD card reader, a rotary encoder and a 20 character * 4 line LCD.
When this control panel is connected to RAMPS 1.4, you don’t need your PC anymore. The smart control panel supplies power for your SD card. Further more actions like calibration, axes movements can be done by adjusting the rotary encoder on the Smart Control panel.
With g-code design stored on the SD card, you can print your 3D designs without PC.


Connection

Note: This product needs to work with connection lead and adapter board.

Please refer to the following link to purchase them.


https://wiki.keyestudio.com/KS0477_Keyestudio_3D_Smart_Controller_2004LCD_Module%2BCable%2BAdapter_Board


thumb

Resources

https://fs.keyestudio.com/KS0150