Search results

Jump to: navigation, search

Page title matches

  • [[image:ks0006.png|thumb|500px|right|Keyestudio keyestudio MEGA Sensor Shield V1]] Now don’t worry about that. You can use this keyestudio MEGA sensor shield.<br>
    3 KB (426 words) - 15:38, 14 September 2018
  • [[image:图片1- ks0007.png|thumb|600px|right|Keyestudio L298P Motor Shield]] Now, we have launched this keyestudio motor shield with L298P as core. Just simply stack it onto UNO R3 board when using. Note
    4 KB (614 words) - 15:39, 14 September 2018
  • ...e:KS0163 (3).png|thumb|700px|right|keyestudio 40 RGB LED 2812 Pixel Matrix Shield]] keyestudio 2812 shield adopts stackable design compatible with UNO board. It is an intelligent con
    8 KB (1,177 words) - 11:18, 17 December 2018
  • [[image:图片1- ks0164.png|thumb|500px|right|keyestudio Xbee Sensor Shield]] That’s why we develop this keyestudio XBEE sensor shield. It can help you easily connect most sensor modules to Arduino.
    3 KB (489 words) - 16:24, 28 September 2018
  • [[image:ks0184.png|thumb|500px|right|Keyestudio Multi-purpose Shield V2]] Multi-purpose Shield V1 is a learning board based on Arduino. No need for soldering and connecti
    7 KB (991 words) - 17:07, 21 September 2018
  • [[image:KS0254.png|thumb|700px|right|keyestudio Sim800c Shield]] The shield supports the frequency of EGSM 900MHz /DCS 1800MHz and GSM850 MHz /PCS 1900
    6 KB (887 words) - 09:21, 5 November 2018
  • [[image:KS0258.png|thumb|800px|right|keyestudio 16-channel Servo Motor Drive Shield]] The shield also comes with PCB double-sided holes, which can be used to solder with co
    4 KB (647 words) - 16:41, 31 August 2018
  • [[image:KS0259.png|thumb|800px|right|keyestudio PN532 NFC/RFID Controller Shield]] ...ased on PN532 chip is used for field communication close to 13.56MHz. This shield is equipped with an antenna onboard, so there is no external antenna coil.
    5 KB (816 words) - 09:01, 26 September 2018
  • [[image:图片1- ks0257.png|thumb|700px|right|keyestudio 2.8inch TFT LCD Shield]] This is a keyestudio 2.8 inch TFT LCD shield with touchscreen. This TFT display is driven with ILI9325 chip and has 240x
    19 KB (2,562 words) - 10:57, 4 September 2018
  • ...le=Ks0152_keyestudio_CNC_Shield_V4&action=edit&redlink=1 keyestudio CNC Shield V4]'''<br> ...rts, which means 6 IO ports is sufficient to manage 3 stepper motors. This shield can make quick work for managing stepper motors in your project.<br>
    9 KB (1,445 words) - 12:00, 17 December 2018
  • ...rts, which means 6 IO ports is sufficient to manage 3 stepper motors. This shield can make quick work for managing stepper motors in your project. ...eyestudio.com/index.php/Ks0160_keyestudio_CNC_Shield_V3 keyestudio CNC Shield Version 3.0 ] <br>
    9 KB (1,447 words) - 14:20, 28 December 2018
  • ==Arduino CNC kit / CNC Shield V2.0 +keyestudio uno R3+3pcs A4988 driver / GRBL compatible== ...rts, which means 6 IO ports is sufficient to manage 3 stepper motors. This shield can make quick work for managing stepper motors in your project. <br>
    9 KB (1,397 words) - 15:20, 21 August 2018
  • [[image:1421.png|thumb|400px|right|Keyestudio SIM900 GSM/GPRS Module Shield]] SIM900 GSM/GPRS shield is based on Quad-Band SIM900 GSM/GPRS module. It provides Arduino with GSM/
    6 KB (941 words) - 10:07, 17 December 2018
  • [[image:ks0147.png|thumb|400px|right|Keyestudio Touch Key USB shield]] This Touch Key USB Shield is developed by KEYESTUDIO. <br>
    6 KB (866 words) - 10:09, 17 December 2018
  • [[image:Ks0150-图片1.png|thumb|400px|right|Keyestudio CNC Shield V2]] keyestudio CNC shield V2 is used as driving shield for engraving machines, fully compatible with [http://wiki.keyestudio.com/i
    4 KB (604 words) - 13:15, 14 August 2018
  • [[image:Ks0152-图片1.png|thumb|400px|right|Keyestudio CNC Shield V4]] ...0 NANO control board ]. So you just need to stack the Nano board onto the shield when using. <br>
    4 KB (623 words) - 13:17, 14 August 2018
  • [[image:KS0153.jpg|thumb|500px|right|Keyestudio JoyStick Shield]] Keyestudio Joystick Shield is particularly developed for you to design your own game machines. <br>
    5 KB (664 words) - 11:21, 30 August 2018
  • [[image:ks0154.png|thumb|500px|right|Keyestudio Mega Pololu Shield (RAMPS 1.4 )]] keyestudio RAMPS1.4A is used as driving shield for 3D printers, fully compatible with [http://wiki.keyestudio.com/index.ph
    3 KB (541 words) - 16:35, 26 September 2018
  • [[image:ks0155.png|thumb|500px|right|Keyestudio USB Host v1.5 shield]] keyestudio USB Host shield V1.5 is an add-on board for Arduino USB Host. Directly plug it to Arduino b
    5 KB (711 words) - 14:35, 27 September 2018
  • [[image:ks0156.png|thumb|500px|right|Keyestudio W5100 Ethernet Shield]] keyestudio W5100 Ethernet Shield gives you an easy way to get your Arduino Online. It can turn your Arduino
    6 KB (970 words) - 11:38, 27 September 2018
  • [[image:KS0160- 图片1.png|thumb|400px|right|Keyestudio CNC Shield V3]] keyestudio CNC shield V3 is used as driving shield for engraving machines, fully compatible with [http://wiki.keyestudio.com/i
    5 KB (700 words) - 13:31, 14 August 2018
  • [[image:ks0183.png|thumb|600px|right|Keyestudio Multi-purpose Shield V1]] Multi-purpose Shield V1 is a learning board based on Arduino. No need for soldering and connecti
    7 KB (1,034 words) - 17:06, 21 September 2018
  • *[https://www.aliexpress.com/store/product/NEW-keyestudio-PM2-5-Shield-for-Arduino/1452162_32713460144.html?spm=2114.12010612.8148356.1.c088276fHz
    5 KB (716 words) - 14:40, 29 August 2018
  • ==keyestudio RPI JoyStick Shield== The joystick shield provides two simple analog inputs and one analog output along with four sep
    5 KB (810 words) - 09:47, 14 November 2017
  • ==keyestudio RPI 4-channel Relay Shield== This shield uses SONGLE relay, providing 4-channel input and output. The relays are iso
    2 KB (376 words) - 08:47, 29 November 2017
  • ==keyestudio RPI GPIO-PCF8591 Shield== ...development. However, it won't be a problem anymore. The RPI GPIO-PCF8591 Shield allows you to add high-precision AD/DA functions to the Raspberry Pi.<br>
    5 KB (737 words) - 09:53, 14 November 2017
  • ==keyestudio RPI TFT 3.5 LCD Touchscreen Shield== http://www.keyestudio.com/keyestudio-rpi-tft-3-5-lcd-touchscreen-shield.html
    2 KB (387 words) - 10:01, 14 November 2017
  • 0 bytes (0 words) - 11:14, 11 February 2017
  • ==keyestudio Balance Car Shield== ...LGS Electronics, which is specially applied to large power motors. So the shield can drive two DC motors, and the driven current is up to 2A. <br>
    6 KB (775 words) - 13:43, 27 September 2018
  • ==keyestudio Raspberry Pi T-type GPIO Shield Kit== This kit is designed for you to connect to external devices,including T-type shield, 40 pin colorful jumper wires, 400-pinpoint breadboard, compatible with Ras
    521 bytes (68 words) - 14:47, 16 October 2017
  • ==keyestudio RPI GPS Shield== http://www.keyestudio.com/keyestudio-rpi-gps-shield.html
    5 KB (848 words) - 09:18, 29 November 2017
  • [[image:Ks0251 4-relay.png|thumb|800px|right|Keyestudio 4-channel Relay Shield]] ..._keyestudio_UNO_R3_BOARD UNO R3 control board]. The 4-channel relay on the shield is active at HIGH level. Separately connect the 4-channel relay to the dig
    4 KB (687 words) - 11:56, 17 December 2018
  • [[image:Ks0256-.png|thumb|700px|right|keyestudio LCD1602 Expansion Shield ]] The keyestudio LCD shield integrates 1602 LCD display and six buttons into one piece, which is fully
    5 KB (841 words) - 11:57, 17 December 2018
  • [[image:KS0253.png|thumb|700px|right|keyestudio GPS Shield]] ...ositioning. As for arduino MCU DIY experiments, is there a GPS positioning shield that can be compatible with the Arduino MCU? <br>
    5 KB (796 words) - 11:05, 30 September 2018
  • ...255 bluetooth 4.0.png|thumb|600px|right|Keyestudio Bluetooth 4.0 Expansion Shield]] The keyestudio Bluetooth 4.0 shield is an integration of sensor shield and HM-10 Bluetooth-4.0, fully compatible with UNO R3. So it is very easy t
    4 KB (564 words) - 11:40, 20 September 2018
  • ==Keyestudio CNC Kit / CNC Shield V3.0 +keyestudio Uno R3+4pcs DRV8825 Driver / GRBL Compatible== ...rts, which means 6 IO ports is sufficient to manage 3 stepper motors. This shield can make quick work for managing stepper motors in your project.
    9 KB (1,442 words) - 14:14, 28 December 2018
  • [[image:KS0146.jpg|thumb|500px|right|keyestudio Nano IO Shield]] ...sensor modules and external power. So we particularly design this Nano IO shield.<br>
    2 KB (347 words) - 11:34, 20 September 2018
  • [[image:Ks0150-图片1.png|thumb|400px|right|Keyestudio CNC Shield V2]] keyestudio CNC shield V2 is used as driving shield for engraving machines, fully compatible with [http://wiki.keyestudio.com/i
    4 KB (604 words) - 13:19, 14 August 2018
  • ==keyestudio RPI T-type GPIO Shield Kit== This kit is designed for you to connect to external devices,including T-type shield, 40 pin colorful jumper wires, 400-pinpoint breadboard, compatible with Ras
    391 bytes (56 words) - 11:23, 8 June 2018
  • ==keyestudio RPI L298P Motor Drive Shield == Keyestudio RPI L298P motor drive shield adopts high-power motor driver chip L298P, which can directly drive two DC
    6 KB (717 words) - 09:27, 5 July 2018
  • 569 bytes (86 words) - 14:52, 2 May 2018
  • == keyestudio T-type Shield Adapter for micro:bit == ...eadboard using [https://www.aliexpress.com/store/product/Free-shipping-65x-shield-cable-male-to-male-wire-kit-bread-board-jumper-wire-jumper/1452162_20459312
    2 KB (328 words) - 15:15, 23 August 2018
  • == Keyestudio Power Supply Shield for micro:bit == [https://www.aliexpress.com/store/product/Keyestudio-Power-Supply-Shield-for-BBC-Micro-Bit/1452162_32846727695.html?spm=2114.12010612.0.0.226973f2SV
    2 KB (236 words) - 11:04, 3 April 2018
  • [[image:ks0004.png|thumb|500px|right|Keyestudio Sensor Shield V5]] ...ith this keyestudio sensor shield, you can easily solve that problem. This shield is fully compatible with UNO R3 control board, so you can easily stack it o
    3 KB (536 words) - 10:03, 17 December 2018
  • [[image:Ks0152-图片1.png|thumb|400px|right|Keyestudio CNC Shield V4]] ...0 NANO control board ]. So you just need to stack the Nano board onto the shield when using. <br>
    4 KB (623 words) - 14:06, 14 August 2018
  • [[image:KS0160- 图片1.png|thumb|400px|right|Keyestudio CNC Shield V3]] keyestudio CNC shield V3 is used as driving shield for engraving machines, fully compatible with [http://wiki.keyestudio.com/i
    5 KB (700 words) - 13:30, 14 August 2018
  • [[image:KS0360 (1).jpg|thumb|400px|right|Keyestudio Sensor Shield V2 for BBC micro:bit]] The sensor shield V2 breaks out all the PIO ports on the micro:bit control board into 3PIN in
    2 KB (381 words) - 16:31, 17 October 2018
  • == Keyestudio SK6812 4x8 LED Matrix Shield for micro:bit == Keyestudio SK6812 4x8 LED matrix shield comes with 32 SK6812 LED lights, fully compatible with micro:bit control bo
    4 KB (639 words) - 13:45, 29 August 2018
  • 0 bytes (0 words) - 14:31, 4 September 2018
  • [[image:KS0250-.jpg|thumb|600px|right|Keyestudio NANO IO Shield]] ...experiments. Onboard comes with two 3mm fixed holes, convenient to fix the shield on other objects.
    2 KB (234 words) - 09:21, 15 February 2019
  • [[image:ks0006.png|thumb|500px|right|Keyestudio keyestudio MEGA Sensor Shield V1]] Now don’t worry about that. You can use this keyestudio MEGA sensor shield.<br>
    3 KB (426 words) - 10:05, 17 December 2018
  • [[image:图片1- ks0007.png|thumb|600px|right|Keyestudio L298P Motor Shield]] Now, we have launched this keyestudio motor shield with L298P as core. Just simply stack it onto UNO R3 board when using. Note
    4 KB (612 words) - 10:06, 17 December 2018
  • [[image:Screw shield.png|thumb|600px|right|Keyestudio Proto Screw Shield for Arduino]] ...imes you might feel very troublesome when connect the breadboard or sensor shield to Arduino board with a bunch of jumper wires. <br>
    2 KB (342 words) - 15:56, 18 September 2018
  • [[image:KS0366.png|thumb|400px|right|Keyestudio ESP13 Shield Serial Port Module]] The keyestudio ESP13 shield is particularly designed for Arduino microcontrollers to connect the WiFi.<
    8 KB (1,164 words) - 08:39, 12 November 2018
  • 0 bytes (0 words) - 17:03, 16 November 2018
  • [[image:Ks0377-.png|thumb|400px|right| Keyestudio Balance Car Shield V3]] You are able to combine this shield with UNO R3 control board to make a balance car based on Arduino developme
    25 KB (3,349 words) - 08:43, 29 November 2018
  • [[image:0390图片1.png|thumb|500px|right| EASY plug IIC Interface Conversion Shield(Black and Eco-friendly)]] This is an EASY plug IIC interface conversion shield, compatible with both EASY plug interface and 2.54mm pitch header interface
    2 KB (314 words) - 10:12, 2 January 2019
  • [[image:ks0385.png|thumb|500px|right|keyestudio ESP-01S WiFi to Serial Shield for Arduino]] ...mode. The AT command can be directly tested through the serial port on the shield.<br>
    4 KB (643 words) - 13:25, 9 January 2019
  • ...88.png|thumb|500px|right|keyestudio USB to ESP-01S Wifi Module Serial Port Shield]] This is an expansion board for the ESP-01S WiFi module. The shield comes with a USB to Serial port chip CH340G.<br>
    6 KB (1,009 words) - 13:24, 9 January 2019
  • ...age:0392图片1.png|thumb|500px|right| keyestudio I2C Interface Conversion Shield(Black and Eco-friendly)]] This is an I2C interface conversion shield. <br>
    2 KB (241 words) - 10:20, 2 January 2019
  • [[image:0393图片1.png|thumb|500px|right|EASY plug WIFI and Bluetooth Shield]] This shield is designed for the ESP-01S WiFi module and HC-06 Bluetooth module. Onboard
    4 KB (587 words) - 09:27, 7 January 2019
  • [[image:0393图片1.png|thumb|500px|right|EASY plug WIFI and Bluetooth Shield]] This shield is designed for the ESP-01S WiFi module and HC-06 Bluetooth module. Onboard
    4 KB (600 words) - 13:22, 9 January 2019
  • [[image:ks0406.png|thumb|350px|right|Keyestudio RS232 to TTL Conversion Shield Compatible with Arduino]] The RS232 to TTL conversion shield is specially designed for UNO R3 control board, very convenient to change t
    3 KB (421 words) - 09:24, 15 February 2019

Page text matches

  • <div id="Shield"></div> =='''Shield'''==
    23 KB (2,917 words) - 10:29, 19 February 2019
  • ...e reference with which the microcontroller operates. A properly configured shield can read the IOREF pin voltage and select the appropriate power source or e
    22 KB (3,479 words) - 17:04, 14 December 2018
  • ...igital pin. This joystick module can be easily connected to Arduino by IO Shield. This module is for Arduino(V5) with cables supplied. 
    1 KB (204 words) - 16:47, 19 April 2018
  • [[image:ks0006.png|thumb|500px|right|Keyestudio keyestudio MEGA Sensor Shield V1]] Now don’t worry about that. You can use this keyestudio MEGA sensor shield.<br>
    3 KB (426 words) - 15:38, 14 September 2018
  • [[image:图片1- ks0007.png|thumb|600px|right|Keyestudio L298P Motor Shield]] Now, we have launched this keyestudio motor shield with L298P as core. Just simply stack it onto UNO R3 board when using. Note
    4 KB (614 words) - 15:39, 14 September 2018
  • ...e:KS0163 (3).png|thumb|700px|right|keyestudio 40 RGB LED 2812 Pixel Matrix Shield]] keyestudio 2812 shield adopts stackable design compatible with UNO board. It is an intelligent con
    8 KB (1,177 words) - 11:18, 17 December 2018
  • ...color, ideal for Arduino starters. It can be easily connected to IO/Sensor shield.
    1 KB (130 words) - 14:36, 2 May 2018
  • ...function of LCD display etc. Using 3P sensor cable to connect it to sensor shield, it can be installed to 4WD AL alloy mobile robot platform to realize colli
    2 KB (302 words) - 15:37, 19 April 2018
  • ...ensitivity. The LM35 linear temperature sensor and sensor-specific Arduino shield can be easily combined together.
    2 KB (293 words) - 15:33, 19 April 2018
  • ...it can be used to make amazing interactive projects. With dedicated sensor shield and Arduino, you can achieve interesting and interactive work.
    1 KB (189 words) - 16:44, 11 June 2018
  • The "L" LED of the shield connected with IR Receiver will blink when IR Receiver faces to IR Transmit
    4 KB (522 words) - 16:49, 11 June 2018
  • This is a basic application module. You can simply plug it into an IO shield to have your first try of Arduino. <br>
    2 KB (246 words) - 14:41, 15 February 2019
  • ...a vibration sensor from keyestudio. You can directly plug it on our sensor Shield V5, vibrate this sensor, and Arduino can receive a digital signal, making i
    2 KB (189 words) - 14:18, 19 April 2018
  • [[image:图片1- ks0164.png|thumb|500px|right|keyestudio Xbee Sensor Shield]] That’s why we develop this keyestudio XBEE sensor shield. It can help you easily connect most sensor modules to Arduino.
    3 KB (489 words) - 16:24, 28 September 2018
  • [[image:ks0184.png|thumb|500px|right|Keyestudio Multi-purpose Shield V2]] Multi-purpose Shield V1 is a learning board based on Arduino. No need for soldering and connecti
    7 KB (991 words) - 17:07, 21 September 2018
  • [[image:KS0254.png|thumb|700px|right|keyestudio Sim800c Shield]] The shield supports the frequency of EGSM 900MHz /DCS 1800MHz and GSM850 MHz /PCS 1900
    6 KB (887 words) - 09:21, 5 November 2018
  • [[image:KS0258.png|thumb|800px|right|keyestudio 16-channel Servo Motor Drive Shield]] The shield also comes with PCB double-sided holes, which can be used to solder with co
    4 KB (647 words) - 16:41, 31 August 2018
  • [[image:KS0259.png|thumb|800px|right|keyestudio PN532 NFC/RFID Controller Shield]] ...ased on PN532 chip is used for field communication close to 13.56MHz. This shield is equipped with an antenna onboard, so there is no external antenna coil.
    5 KB (816 words) - 09:01, 26 September 2018
  • [[image:图片1- ks0257.png|thumb|700px|right|keyestudio 2.8inch TFT LCD Shield]] This is a keyestudio 2.8 inch TFT LCD shield with touchscreen. This TFT display is driven with ILI9325 chip and has 240x
    19 KB (2,562 words) - 10:57, 4 September 2018
  • Connect the controller board, shield, breadboard and USB cable according to Arduino tutorial. Connect the LED t
    75 KB (11,117 words) - 11:51, 14 February 2019
  • Connect the controller board, shield, breadboard and USB cable according to Arduino tutorial.<br>
    45 KB (6,771 words) - 11:43, 17 December 2018
  • 2. V5 Sensor Shield*1 <br> 2. V5 Sensor Shield*1 <br>
    43 KB (5,823 words) - 11:46, 17 December 2018
  • Next, connect one end of an alligator clip to A0 port on the Touch key USB Shield, and connect the other end to a coin. Connect A1-A5 ports using the same wa ...on the control board; plug the end of the Arduino cable into Touch key USB Shield, and the other end still into PC USB port, now appearing new hardware “US
    14 KB (2,065 words) - 11:15, 20 November 2017
  • ...color, ideal for Arduino starters. It can be easily connected to IO/Sensor shield. <br> ...n be subdivided into 1024, easy to be connected to Arduino with our sensor shield. Combined with other sensors, we can make interesting projects by reading t
    65 KB (8,582 words) - 11:41, 17 December 2018
  • * Shield V5*1 <br> Plug Shield V5 into UNO board and don’t misplace pins to avoid damaging the board. <b
    66 KB (9,829 words) - 11:53, 17 December 2018
  • Next, connect one end of an alligator clip to A0 port on the Touch key USB Shield, and connect the other end to a coin. Connect A1-A5 ports using the same wa ...on the control board; plug the end of the Arduino cable into Touch key USB Shield, and the other end still into PC USB port, now appearing new hardware “US
    14 KB (2,060 words) - 11:52, 17 December 2018
  • Connect the controller board, shield, breadboard and USB cable according to Arduino tutorial. Connect the LED t ...igital pin. This joystick module can be easily connected to Arduino by IO Shield. This module is for Arduino(V5) with cables supplied. 
    109 KB (15,523 words) - 13:45, 11 January 2019
  • 2. keyestudio L298P shield * 1<br> 3. keyestudio V5 sensor shield * 1<br>
    32 KB (4,174 words) - 11:53, 2 January 2019
  • ...exceeding 30cm. If it is necessary to lengthen, you can use wire that can shield electromagnetism and signal amplifier.
    16 KB (2,174 words) - 11:47, 17 December 2018
  • | align="center" | keyestudio BEE Shield V5 | align="center" | keyestudio L298N Motor Shield
    51 KB (6,951 words) - 11:38, 17 December 2018
  • Arduino Relay Shield employs high quality relay with eight channels input and eight channels out
    2 KB (290 words) - 16:41, 16 April 2018
  • ...color, ideal for Arduino starters. It can be easily connected to IO/Sensor shield.<br>
    2 KB (271 words) - 09:33, 28 November 2018
  • 5. L298P motor driver shield * 1 <br> 7. ARDUINO sensor shield * 1<br>
    28 KB (4,024 words) - 13:18, 18 February 2019
  • ...n be subdivided into 1023, easy to be connected to Arduino with our sensor shield. <br>
    2 KB (317 words) - 16:08, 20 November 2018
  • ...ule is ideal for Arduino starters. It can be easily connected to IO/Sensor shield. It enables interaction with light-related works. This is a basic button module. You can simply plug it into an IO shield to have your first try of Arduino. <br>
    139 KB (21,061 words) - 08:25, 10 December 2018
  • | align="center" | keyestudio Shield V5 | align="center" |keyestudio L298N Motor Shield
    82 KB (10,573 words) - 15:33, 22 January 2019
  • ...le=Ks0152_keyestudio_CNC_Shield_V4&action=edit&redlink=1 keyestudio CNC Shield V4]'''<br> ...rts, which means 6 IO ports is sufficient to manage 3 stepper motors. This shield can make quick work for managing stepper motors in your project.<br>
    9 KB (1,445 words) - 12:00, 17 December 2018
  • ...rts, which means 6 IO ports is sufficient to manage 3 stepper motors. This shield can make quick work for managing stepper motors in your project. ...eyestudio.com/index.php/Ks0160_keyestudio_CNC_Shield_V3 keyestudio CNC Shield Version 3.0 ] <br>
    9 KB (1,447 words) - 14:20, 28 December 2018
  • ==Arduino CNC kit / CNC Shield V2.0 +keyestudio uno R3+3pcs A4988 driver / GRBL compatible== ...rts, which means 6 IO ports is sufficient to manage 3 stepper motors. This shield can make quick work for managing stepper motors in your project. <br>
    9 KB (1,397 words) - 15:20, 21 August 2018
  • It is a Mega Pololu Shield, or RAMPS for short, designed to fit the entire electronics needed for a Re ...lug in stepper drivers and extruder control electronics on an Arduino MEGA shield for easy service, part replacement, upgrade-ability and expansion. Addition
    9 KB (1,366 words) - 09:49, 2 January 2019
  • It is a Mega Pololu Shield, or RAMPS for short, designed to fit the entire electronics needed for a Re ...lug in stepper drivers and extruder control electronics on an Arduino MEGA shield for easy service, part replacement, upgrade-ability and expansion. Addition
    9 KB (1,383 words) - 09:42, 2 January 2019
  • ...me moves freely; bounce back when it hits the edge. Move the slider on the shield to change the value in Analog0, the greater the value, the faster the costu ...[File:ks0165-2.png|500px|frameless|thumb]] , the D10, D11, D13 LEDs on the shield displays light chasing effect; stops after 100 cycles.
    9 KB (1,080 words) - 16:30, 13 April 2018
  • [[image:1421.png|thumb|400px|right|Keyestudio SIM900 GSM/GPRS Module Shield]] SIM900 GSM/GPRS shield is based on Quad-Band SIM900 GSM/GPRS module. It provides Arduino with GSM/
    6 KB (941 words) - 10:07, 17 December 2018
  • [[image:ks0147.png|thumb|400px|right|Keyestudio Touch Key USB shield]] This Touch Key USB Shield is developed by KEYESTUDIO. <br>
    6 KB (866 words) - 10:09, 17 December 2018
  • [[image:Ks0150-图片1.png|thumb|400px|right|Keyestudio CNC Shield V2]] keyestudio CNC shield V2 is used as driving shield for engraving machines, fully compatible with [http://wiki.keyestudio.com/i
    4 KB (604 words) - 13:15, 14 August 2018
  • [[image:Ks0152-图片1.png|thumb|400px|right|Keyestudio CNC Shield V4]] ...0 NANO control board ]. So you just need to stack the Nano board onto the shield when using. <br>
    4 KB (623 words) - 13:17, 14 August 2018
  • [[image:KS0153.jpg|thumb|500px|right|Keyestudio JoyStick Shield]] Keyestudio Joystick Shield is particularly developed for you to design your own game machines. <br>
    5 KB (664 words) - 11:21, 30 August 2018
  • [[image:ks0154.png|thumb|500px|right|Keyestudio Mega Pololu Shield (RAMPS 1.4 )]] keyestudio RAMPS1.4A is used as driving shield for 3D printers, fully compatible with [http://wiki.keyestudio.com/index.ph
    3 KB (541 words) - 16:35, 26 September 2018
  • [[image:ks0155.png|thumb|500px|right|Keyestudio USB Host v1.5 shield]] keyestudio USB Host shield V1.5 is an add-on board for Arduino USB Host. Directly plug it to Arduino b
    5 KB (711 words) - 14:35, 27 September 2018
  • [[image:ks0156.png|thumb|500px|right|Keyestudio W5100 Ethernet Shield]] keyestudio W5100 Ethernet Shield gives you an easy way to get your Arduino Online. It can turn your Arduino
    6 KB (970 words) - 11:38, 27 September 2018
  • [[image:KS0160- 图片1.png|thumb|400px|right|Keyestudio CNC Shield V3]] keyestudio CNC shield V3 is used as driving shield for engraving machines, fully compatible with [http://wiki.keyestudio.com/i
    5 KB (700 words) - 13:31, 14 August 2018
  • * The API is almost the same as with the WiFi Shield library,
    11 KB (1,765 words) - 08:56, 7 November 2018
  • [[image:ks0183.png|thumb|600px|right|Keyestudio Multi-purpose Shield V1]] Multi-purpose Shield V1 is a learning board based on Arduino. No need for soldering and connecti
    7 KB (1,034 words) - 17:06, 21 September 2018
  • ...color, ideal for Arduino starters. It can be easily connected to IO/Sensor shield. ...r shield; you can make amazing interactive projects. With dedicated sensor shield and Arduino, you can achieve interesting and interactive work.
    39 KB (5,556 words) - 11:49, 17 December 2018
  • ...function of LCD display etc. Using 3P sensor cable to connect it to sensor shield, it can be installed to 4WD AL alloy mobile robot platform to realize colli ...ensitivity. The LM35 linear temperature sensor and sensor-specific Arduino shield can be easily combined.
    37 KB (5,304 words) - 11:50, 17 December 2018
  • keyestudio Relay Shield employs high quality relay with four channels input and four channels outpu
    2 KB (291 words) - 16:49, 16 April 2018
  • This is a basic application module. You can simply plug it into an IO shield to have your first taste of Arduino.  ...a vibration sensor from keyestudio. You can directly plug it on our sensor Shield V5, vibrate this sensor, and Arduino can receive a digital signal, making i
    43 KB (6,167 words) - 11:51, 17 December 2018
  • ...color, ideal for Arduino starters. It can be easily connected to IO/Sensor shield. ...ensitivity. The LM35 linear temperature sensor and sensor-specific Arduino shield can be easily combined.<br>
    55 KB (8,131 words) - 11:45, 17 December 2018
  • ...color, ideal for Arduino starters. It can be easily connected to IO/Sensor shield. ...ensitivity. The LM35 linear temperature sensor and sensor-specific Arduino shield can be easily combined.<br>
    55 KB (8,109 words) - 11:46, 17 December 2018
  • ...digital pin. This joystick module can be easily connected to Arduino by IO Shield. This module is for Arduino(V5) with cables supplied. ...n be subdivided into 1024, easy to be connected to Arduino with our sensor shield. Combined with other sensors, we can make interesting projects by reading t
    40 KB (5,861 words) - 11:51, 17 December 2018
  • Keyestudio Proto Shield is particularly designed for the Arduino UNO R3. It makes it easy for you t ...typing space of both connected and unconnected spaced through-holes on the shield.<br>
    3 KB (427 words) - 10:02, 17 December 2018
  • ==keyestudio RPI JoyStick Shield== The joystick shield provides two simple analog inputs and one analog output along with four sep
    5 KB (810 words) - 09:47, 14 November 2017
  • ==keyestudio RPI 4-channel Relay Shield== This shield uses SONGLE relay, providing 4-channel input and output. The relays are iso
    2 KB (376 words) - 08:47, 29 November 2017
  • ==keyestudio RPI GPIO-PCF8591 Shield== ...development. However, it won't be a problem anymore. The RPI GPIO-PCF8591 Shield allows you to add high-precision AD/DA functions to the Raspberry Pi.<br>
    5 KB (737 words) - 09:53, 14 November 2017
  • ==keyestudio RPI TFT 3.5 LCD Touchscreen Shield== http://www.keyestudio.com/keyestudio-rpi-tft-3-5-lcd-touchscreen-shield.html
    2 KB (387 words) - 10:01, 14 November 2017
  • ==keyestudio Balance Car Shield== ...LGS Electronics, which is specially applied to large power motors. So the shield can drive two DC motors, and the driven current is up to 2A. <br>
    6 KB (775 words) - 13:43, 27 September 2018
  • ==keyestudio Raspberry Pi T-type GPIO Shield Kit== This kit is designed for you to connect to external devices,including T-type shield, 40 pin colorful jumper wires, 400-pinpoint breadboard, compatible with Ras
    521 bytes (68 words) - 14:47, 16 October 2017
  • ==keyestudio RPI GPS Shield== http://www.keyestudio.com/keyestudio-rpi-gps-shield.html
    5 KB (848 words) - 09:18, 29 November 2017
  • ...al for emitting red light. It can be easily connected to Arduino IO/Sensor shield.<br>
    2 KB (263 words) - 09:36, 28 November 2018
  • ...for emitting green light. It can be easily connected to Arduino IO/Sensor shield.<br>
    2 KB (264 words) - 09:40, 28 November 2018
  • ...for emitting yellow light. It can be easily connected to Arduino IO/Sensor shield.<br>
    2 KB (265 words) - 09:44, 28 November 2018
  • ...l for emitting blue light. It can be easily connected to Arduino IO/Sensor shield.<br>
    2 KB (264 words) - 09:48, 28 November 2018
  • ...color, ideal for Arduino starters. It can be easily connected to IO/Sensor shield.<br>
    1 KB (169 words) - 16:06, 19 March 2018
  • ...color, ideal for Arduino starters. It can be easily connected to IO/Sensor shield.<br>
    1 KB (167 words) - 15:53, 19 March 2018
  • ...color, ideal for Arduino starters. It can be easily connected to IO/Sensor shield. <br>
    1 KB (163 words) - 15:36, 19 March 2018
  • ...color, ideal for Arduino starters. It can be easily connected to IO/Sensor shield.<br>
    1 KB (171 words) - 15:25, 19 March 2018
  • // Newer Ethernet shields have a MAC address printed on a sticker on the shield
    4 KB (551 words) - 11:34, 28 November 2018
  • [[image:Ks0251 4-relay.png|thumb|800px|right|Keyestudio 4-channel Relay Shield]] ..._keyestudio_UNO_R3_BOARD UNO R3 control board]. The 4-channel relay on the shield is active at HIGH level. Separately connect the 4-channel relay to the dig
    4 KB (687 words) - 11:56, 17 December 2018
  • [[image:Ks0256-.png|thumb|700px|right|keyestudio LCD1602 Expansion Shield ]] The keyestudio LCD shield integrates 1602 LCD display and six buttons into one piece, which is fully
    5 KB (841 words) - 11:57, 17 December 2018
  • The sensor can be used with Arduino dedicated sensor shield, and Arduino analog port can perceive weak vibration signals, so that it ca
    2 KB (280 words) - 16:09, 28 April 2018
  • [[image:KS0253.png|thumb|700px|right|keyestudio GPS Shield]] ...ositioning. As for arduino MCU DIY experiments, is there a GPS positioning shield that can be compatible with the Arduino MCU? <br>
    5 KB (796 words) - 11:05, 30 September 2018
  • ...255 bluetooth 4.0.png|thumb|600px|right|Keyestudio Bluetooth 4.0 Expansion Shield]] The keyestudio Bluetooth 4.0 shield is an integration of sensor shield and HM-10 Bluetooth-4.0, fully compatible with UNO R3. So it is very easy t
    4 KB (564 words) - 11:40, 20 September 2018
  • ...-pin ICSP connector that connects to the Leonardo's 6-pin ICSP header, the shield will not work.
    15 KB (2,304 words) - 10:34, 12 September 2018
  • ==Keyestudio CNC Kit / CNC Shield V3.0 +keyestudio Uno R3+4pcs DRV8825 Driver / GRBL Compatible== ...rts, which means 6 IO ports is sufficient to manage 3 stepper motors. This shield can make quick work for managing stepper motors in your project.
    9 KB (1,442 words) - 14:14, 28 December 2018
  • [[image:KS0146.jpg|thumb|500px|right|keyestudio Nano IO Shield]] ...sensor modules and external power. So we particularly design this Nano IO shield.<br>
    2 KB (347 words) - 11:34, 20 September 2018
  • [[Category: Shield]]
    10 KB (1,399 words) - 14:59, 28 December 2018
  • | align="center" | NANO Shield ...ortant to pull out the eyes to the limit. Then put the Arduino nano in the shield, optionally you can weld the positive cable of battery holder to '''Vin'''
    9 KB (1,461 words) - 15:10, 23 August 2018
  • |Keyestudio RPI GPIO-PCF8591 Shield |<br>[[File:Shield.png|500px|frameless|thumb]]<br>
    94 KB (13,487 words) - 14:58, 30 August 2018
  • [[image:Ks0150-图片1.png|thumb|400px|right|Keyestudio CNC Shield V2]] keyestudio CNC shield V2 is used as driving shield for engraving machines, fully compatible with [http://wiki.keyestudio.com/i
    4 KB (604 words) - 13:19, 14 August 2018
  • ==keyestudio RPI T-type GPIO Shield Kit== This kit is designed for you to connect to external devices,including T-type shield, 40 pin colorful jumper wires, 400-pinpoint breadboard, compatible with Ras
    391 bytes (56 words) - 11:23, 8 June 2018
  • ==keyestudio RPI L298P Motor Drive Shield == Keyestudio RPI L298P motor drive shield adopts high-power motor driver chip L298P, which can directly drive two DC
    6 KB (717 words) - 09:27, 5 July 2018
  • [[Category: Shield]]
    6 KB (938 words) - 15:22, 29 August 2018
  • ...adopts XBEE design. It has features of compact size, compatible with XBEE shield, and suitable for various 3.3V MCU systems. The module can use AT command t Connect the shield to APC ports; enter cell phone “settings”; pair up the Bluetooth; devic
    2 KB (310 words) - 14:45, 6 June 2018
  • ...adopts XBEE design. It has features of compact size, compatible with XBEE shield, and suitable for various 3.3V MCU systems. The module can use AT command
    2 KB (222 words) - 14:42, 6 June 2018
  • Connect the controller board, shield, breadboard and USB cable according to Arduino tutorial. Connect the LED to ...digital pin. This joystick module can be easily connected to Arduino by IO Shield. This module is for Arduino(V5) with cable supplied. <br>
    120 KB (17,055 words) - 11:59, 14 February 2019
  • == keyestudio T-type Shield Adapter for micro:bit == ...eadboard using [https://www.aliexpress.com/store/product/Free-shipping-65x-shield-cable-male-to-male-wire-kit-bread-board-jumper-wire-jumper/1452162_20459312
    2 KB (328 words) - 15:15, 23 August 2018
  • ...ent board. It can work only need to insert micro bit into keyestudio relay shield, then input DC 5V voltage on the relay VIN GND port, pretty simple and conv
    3 KB (434 words) - 16:35, 30 March 2018
  • == Keyestudio Power Supply Shield for micro:bit == [https://www.aliexpress.com/store/product/Keyestudio-Power-Supply-Shield-for-BBC-Micro-Bit/1452162_32846727695.html?spm=2114.12010612.0.0.226973f2SV
    2 KB (236 words) - 11:04, 3 April 2018
  • Arduino Relay Shield employs high quality SONGLE relay with two-channel input and output. It can
    2 KB (289 words) - 15:53, 20 September 2018
  • | align="center" | Keyestudio quick connectors motor driver shield *Motor drive shield *1
    102 KB (16,554 words) - 11:39, 17 December 2018
  • This is keyestudio ReSpeaker 2-Mic Pi HAT V1.0 shield designed for AI and voice applications. It is a low power stereo Codec base There are two microphones on the shield for sound collection, three APA102 RGB LEDs, one user button and two Grove
    6 KB (967 words) - 15:37, 14 February 2019
  • ...sier, we particularly make this kit, in which includes a keyestudio sensor shield fully compatible with micro bit and other commonly used sensor modules. In | align="center" | Micro bit Sensor Shield V2
    113 KB (18,535 words) - 11:30, 13 February 2019
  • [[Category: Arduino Shield]]
    19 KB (3,042 words) - 11:49, 9 October 2018
  • ...typing space of both connected and unconnected spaced through-holes on the shield. <br> ...readboard (included) on the prototyping area. You can weld elements on the shield directly or connect circuits with tiny breadboard.
    3 KB (454 words) - 10:04, 17 December 2018
  • [[image:ks0004.png|thumb|500px|right|Keyestudio Sensor Shield V5]] ...ith this keyestudio sensor shield, you can easily solve that problem. This shield is fully compatible with UNO R3 control board, so you can easily stack it o
    3 KB (536 words) - 10:03, 17 December 2018
  • [[image:Ks0152-图片1.png|thumb|400px|right|Keyestudio CNC Shield V4]] ...0 NANO control board ]. So you just need to stack the Nano board onto the shield when using. <br>
    4 KB (623 words) - 14:06, 14 August 2018
  • [[image:KS0160- 图片1.png|thumb|400px|right|Keyestudio CNC Shield V3]] keyestudio CNC shield V3 is used as driving shield for engraving machines, fully compatible with [http://wiki.keyestudio.com/i
    5 KB (700 words) - 13:30, 14 August 2018
  • | align="center" | Keyestudio quick connectors motor driver shield * Motor drive shield*1
    136 KB (20,257 words) - 11:41, 17 December 2018
  • * The shield has two servo interfaces.
    81 KB (12,944 words) - 11:40, 17 December 2018
  • [[image:KS0360 (1).jpg|thumb|400px|right|Keyestudio Sensor Shield V2 for BBC micro:bit]] The sensor shield V2 breaks out all the PIO ports on the micro:bit control board into 3PIN in
    2 KB (381 words) - 16:31, 17 October 2018
  • ...e reference with which the microcontroller operates. A properly configured shield can read the IOREF pin voltage and select the appropriate power source or e
    21 KB (3,296 words) - 11:48, 9 October 2018
  • == Keyestudio SK6812 4x8 LED Matrix Shield for micro:bit == Keyestudio SK6812 4x8 LED matrix shield comes with 32 SK6812 LED lights, fully compatible with micro:bit control bo
    4 KB (639 words) - 13:45, 29 August 2018
  • | align="center" | keyestudio TB6612FNG motor/servo drive shield * keyestudio TB6612FNG motor shield *1
    131 KB (18,600 words) - 16:37, 26 December 2018
  • [[image:KS0250-.jpg|thumb|600px|right|Keyestudio NANO IO Shield]] ...experiments. Onboard comes with two 3mm fixed holes, convenient to fix the shield on other objects.
    2 KB (234 words) - 09:21, 15 February 2019
  • [[image:ks0006.png|thumb|500px|right|Keyestudio keyestudio MEGA Sensor Shield V1]] Now don’t worry about that. You can use this keyestudio MEGA sensor shield.<br>
    3 KB (426 words) - 10:05, 17 December 2018
  • [[image:图片1- ks0007.png|thumb|600px|right|Keyestudio L298P Motor Shield]] Now, we have launched this keyestudio motor shield with L298P as core. Just simply stack it onto UNO R3 board when using. Note
    4 KB (612 words) - 10:06, 17 December 2018
  • [[image:Screw shield.png|thumb|600px|right|Keyestudio Proto Screw Shield for Arduino]] ...imes you might feel very troublesome when connect the breadboard or sensor shield to Arduino board with a bunch of jumper wires. <br>
    2 KB (342 words) - 15:56, 18 September 2018
  • [[image:KS0366.png|thumb|400px|right|Keyestudio ESP13 Shield Serial Port Module]] The keyestudio ESP13 shield is particularly designed for Arduino microcontrollers to connect the WiFi.<
    8 KB (1,164 words) - 08:39, 12 November 2018
  • |align="center" | keyestudio Micro:bit smart robot shield (Black and Eco-friendly) |align="center" |<br>[[File:robot shield.png|200px|frameless|thumb]]<br>
    35 KB (5,762 words) - 09:10, 4 January 2019
  • [[image:Ks0377-.png|thumb|400px|right| Keyestudio Balance Car Shield V3]] You are able to combine this shield with UNO R3 control board to make a balance car based on Arduino developme
    25 KB (3,349 words) - 08:43, 29 November 2018
  • ...olors, ideal for Arduino starters. It can be easily connected to IO/Sensor shield. <br> ...n be subdivided into 1023, easy to be connected to Arduino with our sensor shield. <br>
    103 KB (16,268 words) - 17:29, 15 February 2019
  • ...olors, ideal for Arduino starters. It can be easily connected to IO/Sensor shield. <br> ...tank robot platform mainly uses the UNO R3 control board and L298P driver shield, no soldering and easy to play. <br>
    96 KB (14,989 words) - 17:32, 15 February 2019
  • [[image:0390图片1.png|thumb|500px|right| EASY plug IIC Interface Conversion Shield(Black and Eco-friendly)]] This is an EASY plug IIC interface conversion shield, compatible with both EASY plug interface and 2.54mm pitch header interface
    2 KB (314 words) - 10:12, 2 January 2019
  • [[image:ks0385.png|thumb|500px|right|keyestudio ESP-01S WiFi to Serial Shield for Arduino]] ...mode. The AT command can be directly tested through the serial port on the shield.<br>
    4 KB (643 words) - 13:25, 9 January 2019
  • ! align="center" scope="col" | Shield [[Category: Shield]]
    3 KB (406 words) - 13:25, 9 January 2019
  • ...88.png|thumb|500px|right|keyestudio USB to ESP-01S Wifi Module Serial Port Shield]] This is an expansion board for the ESP-01S WiFi module. The shield comes with a USB to Serial port chip CH340G.<br>
    6 KB (1,009 words) - 13:24, 9 January 2019
  • * The API is almost the same as with the WiFi Shield library,
    10 KB (1,620 words) - 15:33, 7 January 2019
  • ...age:0392图片1.png|thumb|500px|right| keyestudio I2C Interface Conversion Shield(Black and Eco-friendly)]] This is an I2C interface conversion shield. <br>
    2 KB (241 words) - 10:20, 2 January 2019
  • [[image:0393图片1.png|thumb|500px|right|EASY plug WIFI and Bluetooth Shield]] This shield is designed for the ESP-01S WiFi module and HC-06 Bluetooth module. Onboard
    4 KB (587 words) - 09:27, 7 January 2019
  • You can connect several modules to the shield, then connect them to control board, and change the communication address,
    4 KB (634 words) - 13:19, 9 January 2019
  • You can connect several modules to the shield, then connect them to control board, and change the communication address,
    4 KB (627 words) - 16:16, 2 January 2019
  • ...uld use a USB to Serial module, that is FT232 module, and a WIFI to serial shield. <br> ...uld use a USB to Serial module, that is FT232 module, and a WIFI to serial shield. <br>
    10 KB (1,372 words) - 08:19, 9 January 2019
  • [[image:0393图片1.png|thumb|500px|right|EASY plug WIFI and Bluetooth Shield]] This shield is designed for the ESP-01S WiFi module and HC-06 Bluetooth module. Onboard
    4 KB (600 words) - 13:22, 9 January 2019
  • ...on module integrated with a push button. You can simply plug it into an IO shield to have your first taste of Arduino. Simply plug it to our IO/Sensor shield or Arduino board, you can make interesting and interactive projects.<br>
    110 KB (16,341 words) - 08:42, 14 February 2019
  • Connect the controller board, shield, breadboard and USB cable according to Arduino tutorial. Connect the LED to
    90 KB (13,479 words) - 11:57, 14 February 2019
  • [[image:ks0406.png|thumb|350px|right|Keyestudio RS232 to TTL Conversion Shield Compatible with Arduino]] The RS232 to TTL conversion shield is specially designed for UNO R3 control board, very convenient to change t
    3 KB (421 words) - 09:24, 15 February 2019