Search results

Page title matches

• Ks0089 MKS BaseV1.2 3D Printer Controller Board (RAMPS 1.4 + Arduino 2560 Remix Board)
  ==MKS BaseV1.2 3D Printer Controller Board (RAMPS 1.4 + Arduino 2560 remix board)== ...assets of the RAMPS 1.4 and Arduino Mega 2560 boards on a fantastic single board solution. The MKS Base 1.2 is an optimal 3D printer controller solution for
  7 KB (1,177 words) - 15:07, 7 January 2021
• KS0533 Keyestudio Max Board
  The UNO MAX main control board uses a Atmega328p main control chip, and integrates a CP2102 USB to serial This board boasts a Type-C USB socket and a four-position DIP switch.
  2 KB (360 words) - 13:37, 6 June 2022
• KS0367 keyestudio ESP8266 WiFi Board
  [[image:Ks0367-.png|thumb|500px|right|Keyestudio ESP8266 WI-FI Board (Black and Eco-friendly)]] This keyestudio ESP8266 WI-FI development board is based on the ESP8266-12FWIFI module developed by Ai-Thinker. <br>
  11 KB (1,725 words) - 10:11, 6 January 2021
• KS0413 keyestudio ESP32 Core Board
  [[image:0413图片1.png|thumb|400px|right|Keyestudio ESP32 Core Board (Black and Eco-friendly)]] This keyestudio ESP32 core board is a Mini development board based on the ESP-WROOM-32 module. <br>
  11 KB (1,678 words) - 09:50, 22 October 2021
• KS5016 Keyestudio ESP32 PLUS Development Board
  This is a universal WIFI plus Bluetooth development board based on ESP32, integrated with ESP32-WOROOM-32 module and compatible with ...efer to the file Get Started with Arduino to install the ESP32 development board driver and Arduino IDE as well as the ESP32 development environment.
  2 KB (335 words) - 08:31, 21 June 2023
• XC4431 Leonardo Tiny Dev Board
  ...1 Tiny Leonardo is as the name suggests, a smaller version of the Leonardo board, sporting a 32u4 ATMEL processor with a 16MHz clock and some interesting zi ...t also has ICSP, i2c, and Serial1 port contained on the bottom side of the board, which will have to be soldered onto; these could also be used as digital p
  2 KB (310 words) - 09:59, 15 May 2023
• KS0500 KEYESTUDIO Max Development Board
  ...28P MCU, and with a cp2102 Chip as a UART-to-USB converter.MAX development board integrates three LEDs, two 6812RGB LEDs, two button switches, a buzzer, a m ...hardware, you can start 20 project courses. If you are a beginner, a MAX board is enough!
  56 KB (8,168 words) - 17:09, 22 April 2021
• KS4030 Keyestudio Microbit Expansion Board
  ...cro:bit expansion board are led out the pins for the connection of control board, motors and sensors. Due to anti-reverse interfaces and the fixed wire sequ ...m anti-reverse interfaces with silk screen. We supply power through the on-board PH2.54 lithium battery box and an micro USB cable. The power supply voltage
  1 KB (219 words) - 15:29, 5 January 2022
• KS0499 KEYESTUDIO Mega 2560 Plus Board
  KEYESTUIDO Mega 2560 plus Board, whose processor core is ATMEGA2560-16AU, is fully compatible with ARDUINO This plus board consists of 54-channel digital input and output ports, of which 15 pins are
  6 KB (920 words) - 08:50, 30 April 2021
• KS0442 EASY Plug Breakout Board
  [[image:Ks0442-1.png|thumb|300px|right|EASY Plug Breakout Board(Black and Eco-friendly)]] ...P6C), it will cause you trouble to connect to keyestudio EASY plug Control Board V2.0. <br>
  2 KB (266 words) - 10:21, 28 April 2021
• KS0548A Keyestudio PLUS V2 Development Board
  ...h Arduino IDE development environment. It is as same as the Arduino UNO R3 board. Moreover, some improvements we made highly strengthen its function(as show * On-board LED pin: D13
  2 KB (260 words) - 11:48, 9 September 2022
• SMP0099 Raspberry Pi Pico Board
  0 bytes (0 words) - 10:39, 11 March 2022
• Troubleshooting ---LEONARDO R3 Development Board
  * Check micro USB port of development board and computer. * Change another computer to test board.
  4 KB (603 words) - 11:29, 25 February 2021
• SMP0093 Raspberry Pi Pico Board
  Raspberry Pi Pico is the low-cost and highly performed development board with digital ports. * 264kB of SRAM, and 2MB of on-board Flash memory
  1 KB (218 words) - 09:33, 22 November 2021
• Ks0001 keyestudio UNO R3 BOARD
  [[image:Ks0001-20.png|thumb|600px|right|Keyestudio UNO R3 Board]] keyestudio Uno R3 is a microcontroller board based on the ATmega328 [http://www.atmel.com/images/Atmel-8271-8-bit-AVR-Mi
  20 KB (3,169 words) - 11:22, 29 April 2021
• KS0535 Keyestudio Motor PLUS Development Board
  The Keyestudio Motor PLUS development board is a control board fully compatible with the Arduino IDE development environment. <br> It is as same as the UNO R3 board. In addition, we also made some improvements. <br>
  2 KB (312 words) - 16:22, 13 December 2022
• KS7001 Keyestudio Maker Programming Development Board
  ...periments. The keyestudio maker programming development board is a control board fully compatible with the Arduino IDE development environment. <br> It includes all the functions of the UNO R3 board of the official website. <br>
  2 KB (262 words) - 11:04, 15 August 2022
• Ks0099 keyestudio EASY plug Control Board
  [[image:ks0099-1.png|thumb|700px|right|Keyestudio EASY plug Control Board V1.0]] Keyestudio Easy-plug control board is a microcontroller board based on the ATmega328P-PU ([http://www.atmel.com/images/Atmel-8271-8-bit-A
  11 KB (1,853 words) - 13:04, 29 August 2018
• KS4025 Keyestudio Micro:bit V2 Board
  ...teenagers. In order to carry it conveniently, we put a micro: bit control board and two manuals in storage bag. The storage bag is light and beautiful. == On-board Resource ==
  3 KB (361 words) - 15:12, 30 April 2021
• MB0098 Main Board For Micro:bit
  0 bytes (0 words) - 15:48, 26 March 2020
• KS0172A Keyestudio (Black) Main Control Board
  [[File:Ks0172A-图片1.png|thumb|500px|right|Keyestudio Main Board With Pin Header Interface]] ...ki.keyestudio.com/Ks0001_keyestudio_UNO_R3_BOARD]. It is a microcontroller board based on the [http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-7810-Au
  19 KB (3,041 words) - 14:01, 30 April 2021
• KS0389 keyestudio ESP8266 WiFi Development Board
  [[image:ks0389.png|thumb|500px|right|Keyestudio ESP8266 WiFi board]] This keyestudio ESP8266 WI-FI development board is based on the ESP8266-12FWIFI module developed by Ai-Thinker. <br>
  10 KB (1,606 words) - 10:13, 6 January 2021
• Ks0248 keyestudio Leonardo R3 Development Board
  [[image:KS0248.jpg|thumb|900px|right|Keyestudio Leonardo R3 Development Board ]] The keyestudio Leonardo is a microcontroller board based on the ATmega32u4 ([https://www.microchip.com/wwwproducts/en/atmega32
  14 KB (2,273 words) - 11:38, 29 April 2021
• Ks0341 Keyestudio UNO Compatible Board Advanced
  [[image:KS0341.jpg|thumb|500px|right|Keyestudio UNO Compatible Board Advanced ]] ....keyestudio.com/index.php/Ks0001_keyestudio_UNO_R3_BOARD keyestudio UNO R3 board] and ARDUINO UNO REV3. <br>
  20 KB (3,148 words) - 08:08, 30 April 2021
• Ks0249 keyestudio PRO MICRO Development Board
  [[image:Ks0249 (2).png|thumb|900px|right|Keyestudio PRO MICRO Development Board ]] keyestudio PRO MICRO is a microcontroller board based on the ATMEGA32U4-MU. It is an easy-to-use open source hardware. <br>
  13 KB (2,029 words) - 11:05, 6 January 2021
• KS5013 Keyestudio 328 WIFI PLUS Main Board
  0 bytes (0 words) - 16:08, 1 November 2022
• KS5014 Keyestudio 2560 WIFI PLUS Main Board
  ...8266, containing all functions of Arduino Mega 2560and ESP8266 development board.<br> <br> | Esp8266 Digital I/O || 9 on-board pin
  7 KB (1,139 words) - 11:53, 17 March 2023
• KS4001 BBC Micro:bit Main Board
  Keyestudio BBC Micro bit Board
  3 KB (376 words) - 10:02, 27 April 2021
• KS5013 Keyestudio 328 WIFI PLUS Main Control Board
  ...esp8266, containing all functions of Arduino unoR3 and ESP8266development board. <br>
  711 bytes (109 words) - 11:49, 17 February 2023
• Ks0350 Keyestudio KEYBOT Coding Robot Control Board
  ...ge:KS0350 (6).jpg|thumb|400px|right|Keyestudio KEYBOT Coding Robot Control Board]] The Keyestudio KEYBOT Coding Robot Control Board is particularly designed for car robot control. <br>
  11 KB (1,706 words) - 13:53, 30 April 2021
• KS3022 Keyestudio Pico IO Prototype Expansion Board
  ...rd works with the Raspberry pico board. It can expand IO ports of the pico board. There are two IIC ports, a serial communication interface , three analog p This sensor board simplifies the circuit and makes it easy to connect with commonly used sens
  606 bytes (92 words) - 15:57, 23 August 2022
• KS0001A Keyestudio REV3 (Black) Main Control Board
  [[image:Ks0001a.jpg|thumb|600px|right|Keyestudio REV3 R3 Board]] keyestudio REV3 is a microcontroller board based on the ATmega328 [http://www.atmel.com/images/Atmel-8271-8-bit-AVR-Mi
  20 KB (3,207 words) - 13:39, 8 January 2020
• Ks0099 keyestudio EASY plug Control Board V1.0
  [[image:ks0099-1.png|thumb|700px|right|Keyestudio EASY plug Control Board V1.0]] Keyestudio Easy-plug control board is a microcontroller board based on the ATmega328P-PU ([http://www.atmel.com/images/Atmel-8271-8-bit-A
  12 KB (1,905 words) - 11:29, 29 April 2021
• Ks0240 keyestudio EASY plug V2.0 Control Board
  [[image:KS0240 (1).jpg|thumb|500px|right|Keyestudio EASY plug Control Board V2.0]] The processor used in keyestudio EASY plug control board V2.0 is ATmega328. <br>
  11 KB (1,729 words) - 16:37, 30 October 2018
• Ks0240 keyestudio EASY plug Control Board V2.0
  [[image:KS0240 (1).jpg|thumb|500px|right|Keyestudio EASY plug Control Board V2.0]] The processor used in keyestudio EASY plug control board V2.0 is ATmega328. <br>
  11 KB (1,790 words) - 11:35, 29 April 2021
• KS0556 Keyestudio 8833 Motor Driver Expansion Board
  The 8833 motor driver expansion board uses PH2.0 terminals and an 8833 motor driver chip driven by the two-channe
  3 KB (399 words) - 16:07, 4 July 2022
• KS0341A Keyestudio REV4 (Black) Main Control Board
  [[image:0341.jpg|thumb|500px|right|Keyestudio REV4 Compatible Board Advanced ]] ...ki.keyestudio.com/index.php/Ks0001_keyestudio_UNO_R3_BOARD keyestudio REV3 board] and ARDUINO UNO. <br>
  20 KB (3,182 words) - 13:56, 30 April 2021
• KS0505(0506)STEM Starter Kit for Plus Board
  == KEYESTUDIO Plus Development Board == ...h the KEYESTUDIO STEM Starter Kit, we first introduce the Plus Development Board, it is the core of all the projects.<br>
  2 KB (279 words) - 13:52, 23 April 2021
• Ks0342 Keyestudio MEGA 2560 Compatible Board Advanced
  [[image:KS0342.jpg|thumb|700px|right|Keyestudio 2560 R3 Board Advanced ]] ...Ks0002_keyestudio_Mega_2560_R3_Development_Board Keyestudio Mega 2560 R3 board ] and ARDUINO MEGA 2560 REV3.<br>
  21 KB (3,335 words) - 13:49, 30 April 2021
• KS418 Micro:bit Motor Driver Expansion Board
  0 bytes (0 words) - 14:49, 5 August 2022
• KS4018 Micro:bit Motor Driver Expansion Board
  The Micro:bit motor drive expansion board contains a PCA9685PW chip and a TB6612FNG chip and so on. In order to save * Weight (bare board): 41.8g
  1 KB (219 words) - 14:49, 5 August 2022
• Ks0304 Keyestudio W5500 ETHERNET DEVELOPMENT BOARD (WITHOUT POE)
  ...le:图片3- ks0304.png|thumb|800px|right|keyestudio W5500 ethernet development board ]]<br> <span style=color:red>Note: TF card can’t be connected to control board when reading IP address code, otherwise, IP address might be not read
  12 KB (1,664 words) - 09:37, 7 May 2021
• Ks0001A Keyestudio REV3 (Black) Main Control Board
  [[image:Ks0001a.jpg|thumb|600px|right|Keyestudio REV3 Board]] keyestudio REV3 is a microcontroller board based on the ATmega328 [http://www.atmel.com/images/Atmel-8271-8-bit-AVR-Mi
  20 KB (3,206 words) - 15:51, 27 December 2019
• KS3019 Raspberry Pi Motor Driver Expansion Board
  0 bytes (0 words) - 13:20, 26 September 2021
• Ks0318 keyestudio Tb6560 Stepper Motor Drive Board
  [[image:KS0318.png|thumb|700px|right| keyestudio Tb6560 Stepper Motor Drive Board (Black and Eco-friendly)]] This keyestudio board mainly uses the TB6560 stepper motor driver, which is an economical stepper
  6 KB (950 words) - 16:53, 4 March 2021
• Ks0063 keyestudio L298N Motor Driver Board Module
  ...ping-keyestudio-new-l298n-shield-dual-h-bridge-dc-stepper-drive-controller-board-module-for-arduino-smart-car-robot-p0194.html '''Official Website''' ] ...ipping-L298N-Dual-Bridge-DC-stepper-Controller-Control-motor-driver-module-Board-for-arduino/1452162_2053327107.html?spm=2114.12010612.8148356.57.39941ad1Ru
  2 KB (281 words) - 10:38, 8 January 2021
• KS0509 Keyestudio Mega 2560 Smart Development Board
  ...TMEGA2560-16AU which is compatible with the Arduino MEGA 2650 development board. Integrated with 2 TB6612 motor driving chips, this processor can be served <br>In addition, the output power supply of this board can reach the maximum 5V 3A, in 3 channels (good heat dissipation).Through
  10 KB (1,692 words) - 15:20, 28 December 2021
• KS0484 Keyestudio Micro bit Power Adapter Board
  ...articularly design a power adapter board compatible with micro：bit control board on the condition that no proper power supply is around. ...an supply power by the black DC port or USB. The DIP switch of the adapter board needs to be dialed to the DC terminal when supplying DC 5-10V by DC port, t
  937 bytes (145 words) - 10:09, 27 April 2021
• KS5014 Keyestudio 2560 WIFI PLUS Main Control Board
  ...8266, containing all functions of Arduino Mega 2560and ESP8266 development board. The two MCU combination is suitable for the development of the Internet of
  1 KB (233 words) - 11:54, 17 February 2023
• Ks0002 keyestudio Mega 2560 R3 Development Board
  [[image:2560--.png|thumb|500px|right|Keyestudio 2560 R3 Board]] Keyestudio Mega 2560 R3 is a microcontroller board based on the [http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-2549-8-
  22 KB (3,451 words) - 11:26, 29 April 2021
• Ks0354 Keyestudio ESP8266 WI-FI Development Board
  [[image:KS0354.png|thumb|500px|right|Keyestudio ESP8266 WI-FI Development Board]] This keyestudio ESP8266 WI-FI development board is based on the ESP8266-12FWIFI module developed by Ai-Thinker. <br>
  11 KB (1,749 words) - 14:53, 17 November 2021
• KS0293 Keyestudio Relay Breakout Board for micro bit
  ...rated a 4-way 5V relay module, fully compatible with micro:bit development board. <br> ...e respectively connected to P4, P3, P7 and P6 of the micro:bit development board. You only need to control the high or low output level of P4, P3, P7 and P6
  4 KB (642 words) - 10:17, 9 March 2021
• KS0563 Keyestudio NONA Motion Sensing Glove Expansion Board
  This motion sensing glove expansion board can power independently due to its 9V battery holder. <br><br> What’s more, you only need to assemble MPU6050 module and BT24 on the board to complete the installation.<br><br><br>
  765 bytes (116 words) - 13:37, 21 March 2023
• KS0296 Keyestudio Joystick Breakout Board for micro bit
  <br>[[File:Ks0296.png|600px|right|thumb|keyestudio Joystick Breakout Board for micro:bit]]<br> ...stick-breakout-board-for-bbc-microbit-p0108-p0108.html Joystick breakout board for the BBC micro:bit]!<br>
  5 KB (829 words) - 10:22, 9 March 2021
• Ks0188 ARDUINO Touch key USB Board-2 Kit
  ...a very simple circuit board and combined with open-source ARDUINO control board to make any object a compute input device. That is to say, it can make stai ...touch part is sensitive to electromagnetic interference around, the touch board and Arduino cable must use shielding line. The cored wire of six shielding
  14 KB (2,060 words) - 09:11, 17 March 2021
• KS0297 Keyestudio Breakout Board Adapter for micro bit
  [[File:Ks0297.png|600px|frameless|thumb|Keyestudio Breakout Board Adapter for micro:bit ]] ...-board-adapter-for-bbc-microbit-p0114-p0114.html Edge Connector Breakout Board Adapter for the BBC micro:bit].<br>
  3 KB (375 words) - 10:50, 27 April 2021
• KS0486 Keyestudio PLUS Development Board (Black And Eco-friendly)
  ...velopment environment. It contains all the functions of the Arduino UNO R3 board. Moreover, some improvements we made highly strengthen its function(as sho * On-board LED pin: D13
  7 KB (1,133 words) - 15:48, 27 July 2022
• Ks0384 Keyestudio KEYBOT Coding Robot Control Board Kit
  [[image:KS0350 (3).jpg|thumb|400px|right|KEYBOT Coding Robot Control Board Kit]] The Keyestudio KEYBOT Coding Robot Control Board is particularly designed for car robot control. <br>
  11 KB (1,796 words) - 08:14, 30 April 2021
• KS0506 STEM Starter Kit for MEGA 2560 Plus Board
  == KEYESTUDIO Plus Development Board == ...h the KEYESTUDIO STEM Starter Kit, we first introduce the Plus Development Board, it is the core of all the projects.<br>
  2 KB (327 words) - 15:35, 25 August 2021
• KS0497 Keyestudio V4.0 Development Board(Compatible With Arduino Uno)
  The processor core of Keyestudio V4.0 development board is ATMEGA328P-PU , fully compatible with ARDUINO UNO REV3.<br> Powering the Arduino, LED on means that your circuit board is correctly powered on.
  12 KB (1,853 words) - 11:43, 27 December 2021
• KS0472 GAMEPI DIY Learning Board Based on ARDUINO
  0 bytes (0 words) - 15:14, 27 September 2019
• KS3030 Keyestudio Raspberry Pi SIM7600X 4G Expansion Board
  ...aspberry Pi 40PIN GPIO interface, compatible with Raspberry Pi series main board and Arduino.<br>
  1 KB (195 words) - 09:08, 12 January 2023
• KS0528 Keyestudio 4WD Mecanum Robot Car PCB Driver Board
  This is a car body driver board with extended functions. It integrates an infrared tracking module, a motor With this driver board, you can make a cool Mecanum 4WD smart car.<br>
  2 KB (322 words) - 13:46, 10 January 2022
• KS0516 Keyestudio Expansion Board+TF Card for Data Recording
  ...ing time for follow-up studies. Therefore, we have designed this expansion board to simplify this process.<br> ...UNO board possible.Furthermore, to facilitate its expansion function, the board is equipped with circular welding holes with spacing of 2.54mm.<br>
  5 KB (688 words) - 11:34, 13 December 2021
• Ks0308 keyestudio Motor Drive Breakout Board for micro bit
  ...th your BBC micro:bit? Unlock its potential with this motor drive breakout board for the BBC micro:bit! <br> The motor drive breakout board integrates TB6612FNG chip. Its per channel can output up to 1.2 A continuou
  5 KB (715 words) - 11:07, 27 April 2021
• KS0322 Keyestudio UNO Prototype Circuit Breakout Board PCB 10PCS
  This kit includes 10 PCS of keyestudio UNO prototype circuit board PCB. <br> This prototype board supports side stacking instead of ICSP header connection..
  2 KB (277 words) - 08:16, 6 May 2020
• KS0323 Keyestudio MEGA2560 Prototype Circuit Breakout Board PCB 10PCS
  This kit includes 10 PCS of keyestudio MEGA 2560 prototype circuit board PCB. <br> *Keyestudio MEGA 2560 Prototype Circuit Board * 10pcs
  2 KB (257 words) - 09:13, 27 April 2021
• KS0498 Keyestudio MEGA 2560 R3 Development Board(Compatible Arduino)
  Keyestudio Mega 2560 R3 is a microcontroller board based on the ATMEGA2560-16AU , fully compatible with ARDUINO MEGA 2560 R3. Here is an explanation of what every element and interface of the board does:
  14 KB (2,165 words) - 10:03, 3 March 2021
• KS0468 Keyestudio Storage Bag Micro:bit Main board Kit
  [[image:0468-1.png|thumb|900px|right|Keyestudio PRO MICRO Development Board ]] In order to carry it conveniently, we put a micro: bit control board and two manuals in storage bag. The storage bag is light and beautiful.
  4 KB (542 words) - 09:03, 27 April 2021
• KS0386 Keyestudio ESP-01S Wifi Module Adapter Board for Arduino
  [[image:ks0386.png|thumb|300px|right|keyestudioESP-01S Wifi Module Adapter Board for Arduino]] This is an expansion board for the ESP-01S WiFi module, compatible with the breadboard. <br>
  3 KB (385 words) - 11:47, 6 January 2021
• KS0476 Keyestudio 3D Smart Controller 12864LCD Module+Cable+Adapter Board
  ...AMPS 1.4 main board and connect the smart controller to the RAMPS 1.4 main board with two FC cables. Pay attention please when connecting. EXP1 of smart con * L-shaped adapter board * 1
  1 KB (205 words) - 10:47, 28 April 2021
• MB0102 Keyestudio Microbit Main Board +USB Cable+Battery Holder with Batteries
  <br>And this basic starter kit which includes a micro: bit control board, 1m USB cable and a battery holder (2 AAA batteries included, wire length 1 == On-board Resource ==
  3 KB (402 words) - 16:44, 2 July 2021
• MB0110 Micro:bit Main Board+USB Cable+Battery Holder with Batteries
  <br>And this basic starter kit which includes a micro: bit control board, 1m USB cable and a battery holder (2 AAA batteries included, wire length 1 == On-board Resource ==
  3 KB (402 words) - 15:46, 23 September 2022
• KS0550 Keyestudio Servo Driver Expansion Board(Black and Eco-friendly)
  Stack the driver board onto the control board, wire up and upload the code. Four servos rotate from 0° to 180°, then fr
  2 KB (280 words) - 13:55, 23 May 2022
• KS0477 Keyestudio 3D Smart Controller 2004LCD Module+Cable+Adapter Board
  ...AMPS 1.4 main board and connect the smart controller to the RAMPS 1.4 main board with two FC cables. Pay attention please when connecting. EXP1 of smart con * L-shaped adapter board * 1
  1 KB (190 words) - 10:49, 28 April 2021
• Ks0391 keyestudio Micro:bit Mini Smart Robot Car (No Main Board)
  |align="center" | <span style="color:red"> '''No Micro:bit main board''' '''f.''' Now, we insert the ultrasonic sensor and micro:bit main board into the car shield.
  34 KB (5,678 words) - 08:13, 29 April 2021
• Ks0295 Keyestudio Sensor Breakout Board for micro bit (black& environmental-friendly)
  ...re with your BBC micro:bit? Unlock its potential with this sensor breakout board for the BBC micro:bit!<br> ...You can connect the external DC4.75-12V to power for micro:bit development board. <br>
  2 KB (368 words) - 10:26, 27 April 2021
• KS0434 keyestudio Edge Connector IO Breakout Board For BBC micro:bit
  [[image:0434-图片1.png|thumb|600px|right|keyestudio Edge Connector IO Breakout Board For micro:bit (Black and Eco-friendly)]] It's what you've been waiting for, the keyestudio Edge Connector IO Breakout Board For BBC micro:bit. <br>
  3 KB (470 words) - 15:21, 30 April 2021
• KS0502 Keyestudio MEGA 2560 PRO Development Board(Black and Eco-friendly)
  The mega 2560 control board, among the series of MCUs , is the most popular since it has numerous pins. ...development board. In fact, its use method is as same as the official mega board, in addition to the different volume.
  10 KB (1,563 words) - 10:13, 30 April 2021
• KS0292 Keyestudio Prototyping Breakout Board V1 with Small Breadboard for micro bit
  ==Keyestudio Prototyping Breakout Board V1 with Small Breadboard for micro:bit == ...th your BBC micro:bit? Unlock its potential with this Prototyping breakout board for the BBC micro:bit! <br>
  3 KB (513 words) - 10:19, 27 April 2021
• Ks0307 keyestudio Prototype Breakout Board V2 With 400-point Breadboard for micro bit
  ...nt-breadboard-for-bbc-micro-bit-p0107.html Keyestudio prototype breakout board V2 ] is specially designed for [http://microbit.org/guide/ Micro bit moth The breakout board has a number of circular weld holes and an external black power jack.<br>
  4 KB (523 words) - 10:51, 27 April 2021
• KS4012 Keyestudio Micro bit Expansion Board with IO Ports (Black and Eco-friendly)
  This expansion board can be connected to external power(DC 6-12V ...board comes with 2 groups of IO interfaces connected to micro bit control board.<br>
  2 KB (341 words) - 14:02, 10 December 2021
• KS0503 Keyestudio PRO MICRO 5V 16MHZ Development Board(Black and Eco-friendly)
  ...age:0503-1.png|thumb|600px|right|Keyestudio PRO MICRO 5V 16MHZ Development Board ]] The processor core of Keyestudio PRO MICRO development board is ATMEGA32U4-MU, fully compatible with ARDUINO.<br>
  7 KB (1,100 words) - 09:10, 9 April 2021
• KS0546 Keyestudio 328 PLUS Development Board Compatible with Arduino R3(Black and eco-friendly)
  ...h Arduino IDE development environment. It is as same as the Arduino UNO R3 board. Moreover, some improvements we made highly strengthen its function(as show * On-board LED pin: D13
  2 KB (264 words) - 16:30, 3 August 2022
• Ks0282 Keyestudio 3D MKS Gen V1.4 Printer Motherboard Control Board(Black &Environmental-protection)
  ==Keyestudio 3D MKS Gen V1.4 Printer Motherboard Control Board== ...solutionof the RAMPS 1.4 and Arduino Mega 2560 board on a fantastic single board. <br>
  8 KB (1,268 words) - 15:18, 7 January 2021
• KS4033 Keyestudio Micro bit DRV8833 Motor Driver Expansion Board (Black and Eco-friendly)
  ...ke advantage of the driver DC motor, we designed this expansion board. The board integrates 3.3V and 5V voltage regulator chips, serial communication interf This board also has 3-pin interfaces which can be connected to other sensors.
  1 KB (223 words) - 11:11, 6 March 2023
• KS5001 ESP32-CAM Development Board WiFi+Bluetooth Module with OV2640 Camera (Black and Eco-friendly)
  Step 1: wire up the USB to serial module and the ESP32-CAM development board ...ntrol board.(USB cable can’t supply large current to drive the development board, thus, the external power more than 5V 500mA is needed.)
  6 KB (880 words) - 10:11, 7 January 2022
• KS0547 Keyestudio NANO PLUS Development Board Compatible with Arduino NANO(Black and Eco-friendly)
  ...D indicator（RX）|| Onboard you can find the label: RX(receive )when control board communicates via serial port, receive the message, RX led flashes. When control board communicates via serial port, send the message, TX led flashes.
  10 KB (1,663 words) - 09:51, 20 March 2023
• KS0337 Keyestudio UNO Board + 400 Tie-Points Breadboard + Chassis + Breadboard Wire Pack of 65 + USB Cable
  [[File:0337-10.png|thumb|400px|right|Keyestudio REV4 Board + 400 Tie-Points Breadboard + Chassis + Breadboard Wire Pack of 65 + USB Ca This kit includes a keyestudio REV4 board, a transparent 400-hole breadboard, a black chassis, 65 pieces of breadboar
  4 KB (595 words) - 15:53, 9 March 2021
• CZ0376 45 in 1 Sensor Starter Kit For BBC Micro:bit (Without Micro:bit Board)
  0 bytes (0 words) - 16:47, 25 March 2020
• KS0327 Keyestudio Stepper Motor Drive Board + 5V Stepper Motor Kit (3PCS)
  == Stepper Motor Drive Board + 5V Stepper Motor (3PCS) == Stepper motor driver board mainly adopts ULN2003 chip. It is a seven-fold Darlington array. This circu
  6 KB (899 words) - 16:08, 9 March 2021

Page text matches

• KS3022 Keyestudio Pico IO Prototype Expansion Board
  ...rd works with the Raspberry pico board. It can expand IO ports of the pico board. There are two IIC ports, a serial communication interface , three analog p This sensor board simplifies the circuit and makes it easy to connect with commonly used sens
  606 bytes (92 words) - 15:57, 23 August 2022
• Ks0288 keyestudio CNC GRBL V0.9
  ...l board form V0.9 to 1.0. The following link goes to CNC GRBL V1.0 control board. Sorry to cause inconvenience for you.</big></big>'''</span>
  370 bytes (61 words) - 17:53, 29 January 2021
• Ks0363 keyestudio TB6612FNG Motor/Servo Drive Shield with PS2 Socket
  ...d with keyestidio plus development board and keyestudio UNO R3 development board.  It extends the pin ports in the form of servo wire sequence. What’s more, the board sets a serial communication interface, a PS2 interface as well as a PH2.0MM
  890 bytes (140 words) - 09:27, 30 August 2022
• KS0484 Keyestudio Micro bit Power Adapter Board
  ...articularly design a power adapter board compatible with micro：bit control board on the condition that no proper power supply is around. ...an supply power by the black DC port or USB. The DIP switch of the adapter board needs to be dialed to the DC terminal when supplying DC 5-10V by DC port, t
  937 bytes (145 words) - 10:09, 27 April 2021
• KS0215 keyestudio RPI T-type GPIO Shield
  This RPI T-type GPIO extension board is specifically designed for Raspberry Pi B+, helping you to connect extern This board can be plugged into any solderless breadboard. The PCB has all pins labeled
  1 KB (148 words) - 10:39, 27 April 2021
• KS3024(KS3024F) Keyestudio Raspberry Pi Pico 42 in 1 Sensor Kit
  ...sensors/modules, a Raspberry Pi Pico board, a Raspberry Pi Pico expansion board and Dupont wires. ...the Raspberry Pi Pico shield. You only need to stack the Raspberry Pi Pico board onto the Raspberry Pi Pico shield, and hook up them with Dupont wires, whic
  730 bytes (109 words) - 14:51, 29 March 2022
• KS4016 Keyestudio Micro: bit T-type Shield V2.0 Adapter(Black and Eco-friendly)
  ...re with your BBC micro:bit? Unlock its potential with this T-type breakout board for the BBC micro:bit! <br> ...e edge connector of this breakout board. Then you can directly plugged the board onto the breadboard.<br>
  1 KB (174 words) - 15:08, 5 August 2022
• Getting Started with keyestudio
  ...d program about Arduino: lighting up an LED. Now we take keyestudio UNO R3 Board as an example to help you how to light up an LED controlled by digital 13 p ====1.Connect keyestudio UNO R3 Board to the PC ====
  2 KB (346 words) - 10:54, 15 March 2018
• KS0442 EASY Plug Breakout Board
  [[image:Ks0442-1.png|thumb|300px|right|EASY Plug Breakout Board(Black and Eco-friendly)]] ...P6C), it will cause you trouble to connect to keyestudio EASY plug Control Board V2.0. <br>
  2 KB (266 words) - 10:21, 28 April 2021
• KS0477 Keyestudio 3D Smart Controller 2004LCD Module+Cable+Adapter Board
  ...AMPS 1.4 main board and connect the smart controller to the RAMPS 1.4 main board with two FC cables. Pay attention please when connecting. EXP1 of smart con * L-shaped adapter board * 1
  1 KB (190 words) - 10:49, 28 April 2021
• Troubleshooting ---LEONARDO R3 Development Board
  * Check micro USB port of development board and computer. * Change another computer to test board.
  4 KB (603 words) - 11:29, 25 February 2021
• KS4013(KS4026) Keyestudio Micro:bit Desk Bit Small Car
  ...it V2 which is the most popular. It consists of delicate servos, a control board with high quality and a yellow car body, which is extremely cool. You can c * Include micro:bit V2, acrylic board and servo board.
  1 KB (214 words) - 13:48, 7 June 2021
• KS0292 Keyestudio Prototyping Breakout Board V1 with Small Breadboard for micro bit
  ==Keyestudio Prototyping Breakout Board V1 with Small Breadboard for micro:bit == ...th your BBC micro:bit? Unlock its potential with this Prototyping breakout board for the BBC micro:bit! <br>
  3 KB (513 words) - 10:19, 27 April 2021
• KS0476 Keyestudio 3D Smart Controller 12864LCD Module+Cable+Adapter Board
  ...AMPS 1.4 main board and connect the smart controller to the RAMPS 1.4 main board with two FC cables. Pay attention please when connecting. EXP1 of smart con * L-shaped adapter board * 1
  1 KB (205 words) - 10:47, 28 April 2021
• KS0219 keyestudio RPI T-type GPIO Shield Kit
  ==keyestudio T-type GPIO extension board== This RPI T-type GPIO extension board is specifically designed for Raspberry Pi B+, helping you to connect extern
  2 KB (306 words) - 10:46, 27 April 2021
• KS0465 keyestudio ESP32-IO Shield (Black and Eco-friendly)
  ...for connecting sensors and modules. In addition, to supply power for ESP32 board, you only need to connect the DC 6-9V voltage to black DC head. Also, the
  1,015 bytes (147 words) - 14:01, 19 May 2021
• KS0434 keyestudio Edge Connector IO Breakout Board For BBC micro:bit
  [[image:0434-图片1.png|thumb|600px|right|keyestudio Edge Connector IO Breakout Board For micro:bit (Black and Eco-friendly)]] It's what you've been waiting for, the keyestudio Edge Connector IO Breakout Board For BBC micro:bit. <br>
  3 KB (470 words) - 15:21, 30 April 2021
• KS5013 Keyestudio 328 WIFI PLUS Main Control Board
  ...esp8266, containing all functions of Arduino unoR3 and ESP8266development board. <br>
  711 bytes (109 words) - 11:49, 17 February 2023
• Ks0100 keyestudio EASY plug White LED Module
  ...as a crystal head socket. The socket is compatible with EASY plug Control board V2.0 <br> You should connect the LED module to control board for communication using an RJ11 cable.<br>
  2 KB (366 words) - 09:30, 28 April 2021
• KS4033 Keyestudio Micro bit DRV8833 Motor Driver Expansion Board (Black and Eco-friendly)
  ...ke advantage of the driver DC motor, we designed this expansion board. The board integrates 3.3V and 5V voltage regulator chips, serial communication interf This board also has 3-pin interfaces which can be connected to other sensors.
  1 KB (223 words) - 11:11, 6 March 2023
• KS0563 Keyestudio NONA Motion Sensing Glove Expansion Board
  This motion sensing glove expansion board can power independently due to its 9V battery holder. <br><br> What’s more, you only need to assemble MPU6050 module and BT24 on the board to complete the installation.<br><br><br>
  765 bytes (116 words) - 13:37, 21 March 2023
• Ks0294 Keyestudio Power Supply Shield for micro bit (black & environmental-friendly)
  Looking to do more with your BBC micro:bit? Use this power supply breakout board for the BBC micro:bit! <br> On-board comes with two interfaces, which can access to two-cell AA batteries, each
  3 KB (378 words) - 10:21, 27 April 2021
• Ks0307 keyestudio Prototype Breakout Board V2 With 400-point Breadboard for micro bit
  ...nt-breadboard-for-bbc-micro-bit-p0107.html Keyestudio prototype breakout board V2 ] is specially designed for [http://microbit.org/guide/ Micro bit moth The breakout board has a number of circular weld holes and an external black power jack.<br>
  4 KB (523 words) - 10:51, 27 April 2021
• KS0481 Keyestudio Micro bit Honeycomb PS2 Joystick Module
  ...ontrol board, and the SW port to the digital port of the micro:bit control board. We can judge the working state of the joystick on the module by reading th ...he digital value of the SW port on the dot matrix of the micro:bit control board.
  2 KB (281 words) - 08:46, 27 April 2021
• KS4030 Keyestudio Microbit Expansion Board
  ...cro:bit expansion board are led out the pins for the connection of control board, motors and sensors. Due to anti-reverse interfaces and the fixed wire sequ ...m anti-reverse interfaces with silk screen. We supply power through the on-board PH2.54 lithium battery box and an micro USB cable. The power supply voltage
  1 KB (219 words) - 15:29, 5 January 2022
• KS4030 Keyestudio Micro：bit IO Port Expansion Sensor Shield with Level Conversion
  ...cro:bit expansion board are led out the pins for the connection of control board, motors and sensors. Due to anti-reverse interfaces and the fixed wire sequ ...m anti-reverse interfaces with silk screen. We supply power through the on-board PH2.54 lithium battery box and an micro USB cable. The power supply voltage
  1 KB (219 words) - 09:26, 9 May 2022
• KS0419 keyestudio micro:bit Tactile Button Module
  ...eyestudio tactile button module is fully compatible with micro:bit control board. It mainly uses a button element, which is a digital signal output device. When using, connect the module to micro:bit control board using Crocodile clip line.<br>
  2 KB (317 words) - 11:15, 4 March 2021
• Ks0119 keyestudio EASY plug Line Tracking Sensor
  This sensor needs to be used together with EASY plug control board.<br> ...plug Control Board with RJ11 6P6C interface. <br> If you have the control board of other brands, it is also equipped with the RJ11 6P6C interface but has d
  2 KB (334 words) - 16:20, 7 January 2021
• KS0505(0506)STEM Starter Kit for Plus Board
  == KEYESTUDIO Plus Development Board == ...h the KEYESTUDIO STEM Starter Kit, we first introduce the Plus Development Board, it is the core of all the projects.<br>
  2 KB (279 words) - 13:52, 23 April 2021
• KS0505(0506)STEM Starter Kit for Arduino
  == KEYESTUDIO Plus Development Board == ...h the KEYESTUDIO STEM Starter Kit, we first introduce the Plus Development Board, it is the core of all the projects.<br>
  2 KB (279 words) - 14:30, 11 June 2021
• Ks0225 keyestudio EASY plug Green LED Module
  ...as a crystal head socket. The socket is compatible with EASY plug Control board V2.0 You should connect the LED module to control board for communication using an RJ11 cable.<br>
  3 KB (420 words) - 09:56, 28 April 2021
• KS0522 Keyestudio 48 in 1 Sensor Kit
  At the same time, some detailed projects for each sensor based on development board are also provided, such as wiring methods and test code. With the help of t Note that in the following projects, the main board and other wires are not included in this kit.<br>
  996 bytes (155 words) - 11:07, 16 September 2022
• Ks0226 keyestudio EASY plug Yellow LED Module
  ...as a crystal head socket. The socket is compatible with EASY plug Control board V2.0 You should connect the LED module to control board for communication using an RJ11 cable.<br>
  3 KB (427 words) - 08:27, 8 January 2021
• Ks0229 keyestudio EASY plug Digital Green LED Module
  This module needs to be used together with EASY plug control board.You can also choose other LED modules to emit different light color like bl ...plug Control Board with RJ11 6P6C interface. <br> If you have the control board of other brands, it is also equipped with the RJ11 6P6C interface but has d
  2 KB (298 words) - 08:31, 8 January 2021
• Ks0479 keyestudio Micro bit Honeycomb Rotary Potentiometer Module
  ...ts with the same name are connected; when connecting the micro:bit control board, we only need to connect 3 ports. ...code successfully. After power-on, LED dot matrix of the micro:bit control board displays the analog value of the corresponding signal terminal. By rotating
  2 KB (230 words) - 08:54, 4 March 2021
• Ks0227 keyestudio EASY plug Blue LED Module
  ...as a crystal head socket. The socket is compatible with EASY plug Control board V2.0 You should connect the LED module to control board for communication using an RJ11 cable.<br>
  3 KB (428 words) - 08:29, 8 January 2021
• Ks0295 Keyestudio Sensor Breakout Board for micro bit (black& environmental-friendly)
  ...re with your BBC micro:bit? Unlock its potential with this sensor breakout board for the BBC micro:bit!<br> ...You can connect the external DC4.75-12V to power for micro:bit development board. <br>
  2 KB (368 words) - 10:26, 27 April 2021
• Ks0224 keyestudio EASY plug Red LED Module
  ...as a crystal head socket. The socket is compatible with EASY plug Control board V2.0 You should connect the LED module to control board for communication using an RJ11 cable.<br>
  3 KB (422 words) - 08:23, 8 January 2021
• Ks0103 keyestudio EASY plug Passive Buzzer Module
  This module should be used together with EASY plug control board.<br> ...plug Control Board with RJ11 6P6C interface. <br> If you have the control board of other brands, it is also equipped with the RJ11 6P6C interface but has d
  2 KB (330 words) - 15:51, 7 January 2021
• KS3017 Keyestudio Raspberry Pico IO Shield
  ...Raspberry Pico IO shield is designed for the Raspberry Pi Pico development board, without soldering. It also incorporates communications ports like 2 x I2C, * GPIO pins, are used for the RP2040 chip of the Pico development board, as shown below;
  1 KB (240 words) - 08:17, 30 December 2021
• KS4012 Keyestudio Micro bit Expansion Board with IO Ports (Black and Eco-friendly)
  This expansion board can be connected to external power(DC 6-12V ...board comes with 2 groups of IO interfaces connected to micro bit control board.<br>
  2 KB (341 words) - 14:02, 10 December 2021
• Ks0114 keyestudio EASY plug Knock Sensor
  This module should be used together with EASY plug control board.<br> ...plug Control Board with RJ11 6P6C interface. <br> If you have the control board of other brands, it is also equipped with the RJ11 6P6C interface but has d
  2 KB (340 words) - 16:14, 7 January 2021
• KS3018 KEYESTUDIO Raspberry Pi GPIO Breakout Kit V2.0
  ...des of components such as a GPIO T-shaped expansion board, an experimental board, connecting wires, LED lights, RGB lights, resistors as well as buttons.<br When using, plug the T-shaped expansion board into the experimental board and connect the GPIO of the Raspberry Pi via a connecting wire. Please pay
  2 KB (260 words) - 12:10, 31 January 2023
• Install Arduino Driver
  Next, we will introduce the driver installation of UNO R3 development board. The driver installation may have slight differences in different computer When you connect UNO board to your computer at the first time, right click the icon of your “Compute
  5 KB (882 words) - 08:33, 24 July 2018
• How to Install Arduino Driver
  Next, we will introduce the driver installation of UNO R3 development board. The driver installation may have slight differences in different computer When you connect UNO board to your computer at the first time, right click the icon of your “Compute
  5 KB (882 words) - 14:20, 1 August 2018
• KS7001 Keyestudio Maker Programming Development Board
  ...periments. The keyestudio maker programming development board is a control board fully compatible with the Arduino IDE development environment. <br> It includes all the functions of the UNO R3 board of the official website. <br>
  2 KB (262 words) - 11:04, 15 August 2022
• Ks0102 keyestudio EASY plug Active Buzzer Module
  ...te: ''' </span> this module should be used together with EASY plug control board.<br> ...plug Control Board with RJ11 6P6C interface. <br> If you have the control board of other brands, it is also equipped with the RJ11 6P6C interface but has d
  2 KB (362 words) - 15:25, 20 May 2021
• Ks0241 keyestudio EASY plug L9110 Fire Extinguishing Module
  This module should be used together with EASY plug control board. ...plug Control Board with RJ11 6P6C interface. <br> If you have the control board of other brands, it is also equipped with the RJ11 6P6C interface but has d
  2 KB (349 words) - 08:34, 8 January 2021
• Ks0291 keyestudio T-type Shield Adapter for micro bit
  ...re with your BBC micro:bit? Unlock its potential with this T-type breakout board for the BBC micro:bit! <br> ...e edge connector of this breakout board. Then you can directly plugged the board onto the [https://www.amazon.com/KEYESTUDIO-Breadboard-Solderless-Arduino-P
  3 KB (516 words) - 10:17, 27 April 2021
• Ks0471 keyestudio Micro bit Honeycomb Soil Sensor
  ...ard. During the experiment, we connect the sensor to the micro:bit control board using crocodile clip wire. With this sensor, we can make an automatic water ...r-on, insert the sensor into soil. The LED dot matrix of micro:bit control board displays the analog value of corresponding soil moisture.<br>
  1 KB (186 words) - 09:38, 27 April 2021
• KS0506 STEM Starter Kit for MEGA 2560 Plus Board
  == KEYESTUDIO Plus Development Board == ...h the KEYESTUDIO STEM Starter Kit, we first introduce the Plus Development Board, it is the core of all the projects.<br>
  2 KB (327 words) - 15:35, 25 August 2021
• Ks0118 keyestudio EASY plug Reed Switch Module
  This sensor needs to be used together with EASY plug control board.<br> ...plug Control Board with RJ11 6P6C interface. <br> If you have the control board of other brands, it is also equipped with the RJ11 6P6C interface but has d
  2 KB (354 words) - 16:19, 7 January 2021
• Ks0124 keyestudio EASY plug DS18B20 Temperature Sensor
  This module should be used together with EASY plug control board. ...plug Control Board with RJ11 6P6C interface. <br> If you have the control board of other brands, it is also equipped with the RJ11 6P6C interface but has d
  3 KB (535 words) - 16:27, 7 January 2021
• KS4017 Keyestudio Micro:bit V2.0 Basic Starter Kit
  <br>Designed by BBC, Micro:bit main board aims to help children aged above 10 years old to have a better learning of ...and gears added provide a better fixing of crocodile clips. Moreover, this board has a sleeping mode to lower the power consumption of battery and it can be
  4 KB (769 words) - 14:01, 20 December 2021
• Ks0111 keyestudio EASY plug Collision Sensor
  This sensor needs to be used together with EASY plug control board. </span><br> ...plug Control Board with RJ11 6P6C interface. <br> If you have the control board of other brands, it is also equipped with the RJ11 6P6C interface but has d
  3 KB (526 words) - 16:08, 7 January 2021
• KS0483 Keyestudio Micro bit 4-Digit Tube Shield(Black and Eco-friendly)
  ...wing the corresponding the data by the LED dot matrix of micro：bit control board, we particularly produce keyestudio micro bit 4-digit Tube Shield to highly ...al tube. P0 is connected to CLK, and P1 goes to DIO. The micro bit control board is easily fixed on the shield with 5 M3*6MM flat screws if you use it.
  2 KB (308 words) - 15:01, 9 June 2020
• KS0297 Keyestudio Breakout Board Adapter for micro bit
  [[File:Ks0297.png|600px|frameless|thumb|Keyestudio Breakout Board Adapter for micro:bit ]] ...-board-adapter-for-bbc-microbit-p0114-p0114.html Edge Connector Breakout Board Adapter for the BBC micro:bit].<br>
  3 KB (375 words) - 10:50, 27 April 2021
• KS0296 Keyestudio Joystick Breakout Board for micro bit
  <br>[[File:Ks0296.png|600px|right|thumb|keyestudio Joystick Breakout Board for micro:bit]]<br> ...stick-breakout-board-for-bbc-microbit-p0108-p0108.html Joystick breakout board for the BBC micro:bit]!<br>
  5 KB (829 words) - 10:22, 9 March 2021
• How to Install the Driver of CP2102 on MAC System
  Connect board we provide to your computer, and open Arduino IDE Click Tools to select Board:Arduino Uno and /dev/cu.usbserial-0001
  2 KB (291 words) - 15:40, 18 November 2020
• Ks0418 Keyestudio micro:bit 5050 RGB Module
  ...le mainly contains a 5050 RGB LED, fully compatible with micro:bit control board. <br> When using, connect the RGB module to micro:bit control board using Crocodile clip line.<br>
  2 KB (320 words) - 11:26, 4 March 2021
• Ks0152 keyestudio CNC Shield V4
  ...tudio_Nano_ch340 NANO control board ]. So you just need to stack the Nano board onto the shield when using. <br> To easily debug the operating mode of stepper motor driver board, there are 3 jumper caps under each pin slots. You can set the working mode
  4 KB (609 words) - 10:28, 29 April 2021
• Ks0113 keyestudio EASY plug Capacitive Touch Sensor
  This module should be used together with EASY plug control board.<br> ...plug Control Board with RJ11 6P6C interface. <br> If you have the control board of other brands, it is also equipped with the RJ11 6P6C interface but has d
  3 KB (554 words) - 16:13, 7 January 2021
• Ks0152 keyestudio A4988 3D printer stepper motor driver CNC shield V4
  ...tudio_Nano_ch340 NANO control board ]. So you just need to stack the Nano board onto the shield when using. <br> To easily debug the operating mode of stepper motor driver board, there are 3 jumper caps under each pin slots. You can set the working mode
  4 KB (623 words) - 13:17, 14 August 2018
• Ks0126 keyestudio EASY plug IR Transmitter Module
  This module should be used together with EASY plug control board. ...plug Control Board with RJ11 6P6C interface. <br> If you have the control board of other brands, it is also equipped with the RJ11 6P6C interface but has d
  3 KB (368 words) - 16:38, 7 January 2021
• Ks0106 keyestudio EASY plug Photocell Sensor
  This module should be used together with EASY plug control board.<br> ...plug Control Board with RJ11 6P6C interface. <br> If you have the control board of other brands, it is also equipped with the RJ11 6P6C interface but has d
  3 KB (471 words) - 15:54, 7 January 2021
• Ks0105 keyestudio EASY plug Analog Sound Sensor
  This module should be used together with EASY plug control board.<br> ...plug Control Board with RJ11 6P6C interface. <br> If you have the control board of other brands, it is also equipped with the RJ11 6P6C interface but has d
  3 KB (481 words) - 15:52, 7 January 2021
• Ks0130 keyestudio EASY plug DS3231 Clock Module
  This module should be used together with EASY plug control board. ...plug Control Board with RJ11 6P6C interface. <br> If you have the control board of other brands, it is also equipped with the RJ11 6P6C interface but has d
  2 KB (373 words) - 16:43, 7 January 2021
• Ks0132 keyestudio EASY plug Analog Alcohol Sensor
  This module should be used together with EASY plug control board.<br> ...plug Control Board with RJ11 6P6C interface. <br> If you have the control board of other brands, it is also equipped with the RJ11 6P6C interface but has d
  3 KB (493 words) - 16:44, 7 January 2021
• KS0528 Keyestudio 4WD Mecanum Robot Car PCB Driver Board
  This is a car body driver board with extended functions. It integrates an infrared tracking module, a motor With this driver board, you can make a cool Mecanum 4WD smart car.<br>
  2 KB (322 words) - 13:46, 10 January 2022
• Ks0136 keyestudio EASY plug OLED Module
  This module should be used together with EASY plug control board. ...plug Control Board with RJ11 6P6C interface. <br> If you have the control board of other brands, it is also equipped with the RJ11 6P6C interface but has d
  3 KB (494 words) - 16:54, 7 January 2021
• KS0322 Keyestudio UNO Prototype Circuit Breakout Board PCB 10PCS
  This kit includes 10 PCS of keyestudio UNO prototype circuit board PCB. <br> This prototype board supports side stacking instead of ICSP header connection..
  2 KB (277 words) - 08:16, 6 May 2020
• Ks0117 keyestudio EASY plug Vibration Sensor Module
  You can directly connect it to our EASY Plug control board with only one cable. Just vibrate this sensor, Arduino can receive a digita This module should be used together with EASY plug control board.<br>
  3 KB (412 words) - 16:18, 7 January 2021
• Ks0252 keyestudio Proto Screw Shield for Arduino
  ...l very troublesome when connect the breadboard or sensor shield to Arduino board with a bunch of jumper wires. <br> ...keyestudio.com/index.php/Ks0001_keyestudio_UNO_R3_BOARD keyestudio UNO R3 BOARD ]
  2 KB (331 words) - 10:56, 29 April 2021
• Ks0125 keyestudio EASY plug IR Receiver Module
  This module should be used together with EASY plug control board.<br> ...plug Control Board with RJ11 6P6C interface. <br> If you have the control board of other brands, it is also equipped with the RJ11 6P6C interface but has d
  3 KB (507 words) - 16:35, 7 January 2021
• Ks0245 keyestudio EASY plug Joystick Module
  This joystick module can be easily connect to EASY PLUG control board with only one cable. <br> ...plug Control Board with RJ11 6P6C interface. <br> If you have the control board of other brands, it is also equipped with the RJ11 6P6C interface but has d
  3 KB (421 words) - 08:38, 8 January 2021
• Ks0128 keyestudio EASY plug ADXL345 Three Axis Acceleration Module
  This module needs to be used together with EASY plug control board.<br> ...plug Control Board with RJ11 6P6C interface. <br> If you have the control board of other brands, it is also equipped with the RJ11 6P6C interface but has d
  4 KB (583 words) - 16:41, 7 January 2021
• Ks0131 keyestudio EASY plug Analog Gas Sensor
  This module should be used together with EASY plug control board.<br> ...plug Control Board with RJ11 6P6C interface. <br> If you have the control board of other brands, it is also equipped with the RJ11 6P6C interface but has d
  3 KB (429 words) - 16:43, 7 January 2021
• Ks0360 Keyestudio Sensor Shield V2 for BBC micro:bit
  ...er sensor modules. We particularly design this keyestudio sensor expansion board V2 for micro:bit.<br> ...N interface (GND, VCC, Signal), very easy to connect the micro:bit control board and other sensor modules. <br>
  4 KB (586 words) - 13:56, 21 March 2022
• Ks0006 MEGA Sensor Shield V1
  ...troubles? when connecting a couple of sensor modules to MEGA 2560 control board, sometimes power output interfaces are not enough, so need to use the bread ...hat you can easily stack the MEGA sensor shield onto the MEGA 2560 control board. <br>
  3 KB (437 words) - 17:10, 4 August 2021
• Ks0121 keyestudio EASY plug Photo Interrupter Module
  This module needs to be used together with EASY plug control board.<br> ...plug Control Board with RJ11 6P6C interface. <br> If you have the control board of other brands, it is also equipped with the RJ11 6P6C interface but has d
  3 KB (519 words) - 16:23, 7 January 2021
• KS0369 EASY plug 4-Digit LED Display
  ...ed into Registered jack, so you can easily connect it to EASY Plug control board using a RJ11 cable.<br> This module should be used together with EASY plug control board.<br>
  5 KB (764 words) - 08:43, 8 January 2021
• KS0293 Keyestudio Relay Breakout Board for micro bit
  ...rated a 4-way 5V relay module, fully compatible with micro:bit development board. <br> ...e respectively connected to P4, P3, P7 and P6 of the micro:bit development board. You only need to control the high or low output level of P4, P3, P7 and P6
  4 KB (642 words) - 10:17, 9 March 2021
• Ks0133 keyestudio EASY plug MQ135 Air Quality Sensor
  This module should be used together with EASY plug control board.<br> ...plug Control Board with RJ11 6P6C interface. <br> If you have the control board of other brands, it is also equipped with the RJ11 6P6C interface but has d
  3 KB (422 words) - 16:48, 7 January 2021
• Ks0127 keyestudio EASY plug Single Relay Module
  This module needs to be used together with EASY plug control board.<br> ...plug Control Board with RJ11 6P6C interface. <br> If you have the control board of other brands, it is also equipped with the RJ11 6P6C interface but has d
  3 KB (432 words) - 16:40, 7 January 2021
• KS0432 keyestudio 3V Sensor Shield For BBC micro:bit
  If you want to connect a bunch of sensor modules to the micro:bit main board, try use our keyestudio new designed sensor shield for micro:bit.<br> ...is VCC (3.0-3V); S is Signal pin; corresponds to IO pins of micro:bit main board.<br>
  3 KB (442 words) - 15:18, 30 April 2021
• Ks0109 keyestudio EASY plug Analog Rotation Sensor
  This module should be used together with EASY plug control board.</span><br> ...plug Control Board with RJ11 6P6C interface. <br> If you have the control board of other brands, it is also equipped with the RJ11 6P6C interface but has d
  4 KB (549 words) - 16:02, 7 January 2021
• Ks0003 keyestudio Protoshield for Arduino with Mini Breadboard
  ...sily solder SMD ICs on the prototyping area to test them with your Arduino board. * [http://www.keyestudio.com/ks0001.html keyestudio UNO R3 BOARD] /Arduino UNO R3
  3 KB (421 words) - 10:10, 29 April 2021
• Ks0129 keyestudio EASY plug DHT11 Temperature and Humidity Sensor
  ...plug Control Board with RJ11 6P6C interface. <br> If you have the control board of other brands, it is also equipped with the RJ11 6P6C interface but has d ...HT11 sensor to control board using an RJ11 cable. Then connect the control board to your PC with a USB cable.
  3 KB (465 words) - 16:42, 7 January 2021
• Ks0115 keyestudio EASY plug Digital Tilt Sensor Module
  ...plug Control Board with RJ11 6P6C interface. <br> If you have the control board of other brands, it is also equipped with the RJ11 6P6C interface but has d ...nd LED module to control board using RJ11 cables. Then connect the control board to your PC with a USB cable.
  3 KB (508 words) - 16:15, 7 January 2021
• Ks0422 keyestudio micro:bit PIR Motion Module
  This keyestudio PIR motion module is fully compatible with micro:bit control board.<br> When using, connect the module to micro:bit control board using Crocodile clip line.<br>
  3 KB (428 words) - 11:08, 1 March 2021
• KS0373 EASY plug Slide Potentiometer
  ...ed into Registered jack, so you can easily connect it to EASY Plug control board using a RJ11 cable.<br> This module should be used together with EASY plug control board.<br>
  4 KB (558 words) - 08:47, 8 January 2021
• Ks0154 keyestudio Mega Pololu Shield (RAMPS 1.4 )
  ...ndex.php/Ks0002_keyestudio_Mega_2560_R3_Development_Board MEGA2560 control board] and official RAMPS 1.4 .<br> Furthermore, it is easy to stack it onto the MEGA 2560 control board, after burning the program, you can combine it with external devices to mak
  3 KB (535 words) - 10:35, 29 April 2021
• Ks0110 keyestudio EASY plug Hall Magnetic Sensor
  This sensor needs to be used together with EASY plug control board. </span><br> ...plug Control Board with RJ11 6P6C interface. <br> If you have the control board of other brands, it is also equipped with the RJ11 6P6C interface but has d
  4 KB (570 words) - 16:05, 7 January 2021
• KS0439 EASY Plug 3W LED Module
  ...of supper bright and high power, and is compatible with EASY plug Control board V2.0. <br> ...rystal socket, so you are able to connect the 3W LED module to the control board using only a RJ11 cable for communication. <br>
  2 KB (289 words) - 09:00, 8 January 2021
• Ks0120 keyestudio EASY plug Infrared Obstacle Avoidance Sensor
  This module should be used together with EASY plug control board. ...plug Control Board with RJ11 6P6C interface. <br> If you have the control board of other brands, it is also equipped with the RJ11 6P6C interface but has d
  4 KB (579 words) - 16:22, 7 January 2021
• KS0386 Keyestudio ESP-01S Wifi Module Adapter Board for Arduino
  [[image:ks0386.png|thumb|300px|right|keyestudioESP-01S Wifi Module Adapter Board for Arduino]] This is an expansion board for the ESP-01S WiFi module, compatible with the breadboard. <br>
  3 KB (385 words) - 11:47, 6 January 2021
• KS5007(KS5007F)KS5008(KS5008F) Keyestudio ESP32 24 in 1 Sensor Kit
  ...ontains 24 commonly used sensors/modules, a ESP32 board, a ESP32 expansion board and Dupont wires.<br> ...Board. You only need to stack the ESP32 mainboard onto the ESP32 Expansion Board, and hook up them with Dupont wires, which is simple and convenient.<br>
  3 KB (357 words) - 16:51, 20 May 2022
• Ks0116 keyestudio EASY plug Flame Sensor Module
  This module should be used together with EASY plug control board.<br> ...plug Control Board with RJ11 6P6C interface. <br> If you have the control board of other brands, it is also equipped with the RJ11 6P6C interface but has d
  3 KB (479 words) - 16:17, 7 January 2021
• KS0371 EASY plug Thin-film Pressure Sensor (Black and Eco-friendly)
  You can connect the sensor to EASY plug Control board for communication using only a RJ11 cable.<br> ...plug Control Board with RJ11 6P6C interface. <br> If you have the control board of other brands, it is also equipped with the RJ11 6P6C interface but has d
  4 KB (527 words) - 08:46, 8 January 2021
• Ks0123 keyestudio EASY plug LM35 Temperature Sensor Module
  This module should be used together with EASY plug control board.<br> ...plug Control Board with RJ11 6P6C interface. <br> If you have the control board of other brands, it is also equipped with the RJ11 6P6C interface but has d
  4 KB (662 words) - 16:26, 7 January 2021
• KS0485 Keyestudio NANO Shield With DC End (Black and Eco-friendly)
  ...up the problem of connecting the sensor shield to keyestudio NANO control board difficultly. ...nal power input, the keyestudio NANO shield provides power to NANO control board on the one hand; it stably outputs 5V (output current 1.5A) to power the ex
  2 KB (258 words) - 10:46, 29 April 2021
• Ks0417 Keyestudio micro:bit 1W LED Module
  This LED module is fully compatible with micro:bit control board. It will emit the white light. The max operating current is 400mA; the maxi When using, connect the LED module to micro:bit control board using Crocodile clip line.<br>
  2 KB (326 words) - 11:29, 4 March 2021
• Ks0233 keyestudio Green LED Module
  ...module to control board using three jumper wires. Then connect the control board to your PC with a USB cable.<br> ...assembled the circuit correctly and verified and uploaded the code to your board. <br>
  2 KB (310 words) - 09:52, 8 January 2021
• Ks0234 keyestudio Yellow LED Module
  ...module to control board using three jumper wires. Then connect the control board to your PC with a USB cable.<br> ...assembled the circuit correctly and verified and uploaded the code to your board. <br>
  2 KB (311 words) - 09:53, 8 January 2021
• Ks0235 keyestudio Blue LED Module
  ...module to control board using three jumper wires. Then connect the control board to your PC with a USB cable.<br> ...assembled the circuit correctly and verified and uploaded the code to your board. <br>
  2 KB (311 words) - 09:54, 8 January 2021
• Ks0246 keyestudio EASY plug Steam Sensor
  ...plug Control Board with RJ11 6P6C interface. <br> If you have the control board of other brands, it is also equipped with the RJ11 6P6C interface but has d ...team sensor to control board using an RJ11 cable. Then connect the control board to your PC with a USB cable.
  3 KB (517 words) - 08:42, 8 January 2021
• Ks0108 keyestudio EASY plug Soil Humidity Sensor
  This module should be used together with EASY plug control board.<br> ...plug Control Board with RJ11 6P6C interface. <br> If you have the control board of other brands, it is also equipped with the RJ11 6P6C interface but has d
  3 KB (498 words) - 15:58, 7 January 2021
• Ks0004 keyestudio Sensor Shield V5
  In the experiments, you might often use UNO R3 control board and several sensor modules. If the interfaces of power output is not enough ...ly solve that problem. This shield is fully compatible with UNO R3 control board, so you can easily stack it onto UNO R3 for use.<br>
  3 KB (537 words) - 10:15, 29 April 2021
• KS0433 keyestudio Terminal Blocks Shield For BBC micro:bit
  If you want to connect a bunch of sensor modules to the micro:bit main board, try use our keyestudio new designed expansion shield for micro:bit.<br> ...is VCC (3.0-3V); S is Signal pin; corresponds to IO pins of micro:bit main board.<br>
  3 KB (483 words) - 15:18, 30 April 2021
• Ks0244 keyestudio EASY plug TEMT6000 Ambient Light Sensor
  This module should be used together with EASY plug control board.<br> ...plug Control Board with RJ11 6P6C interface. <br> If you have the control board of other brands, it is also equipped with the RJ11 6P6C interface but has d
  3 KB (513 words) - 08:38, 8 January 2021
• KS5005(KS5005F)KS5006(KS5006F) Keyestudio ESP32 37 in 1 Sensor Kit
  ...s 37 commonly used sensors and modules, an ESP32 board, an ESP32 expansion board and Dupont wires.<br> ...board. You only need to stack the ESP32 mainboard onto the ESP32 expansion Board, and hook up them with Dupont wires, which is simple and convenient. <br>
  3 KB (431 words) - 15:50, 14 July 2022
• Ks0135 keyestudio EASY plug Bluetooth Module
  It has build-in on-board antenna which provides high quality signals. <br> This module should be used together with EASY plug control board.
  4 KB (543 words) - 16:51, 7 January 2021
• Ks0139 keyestudio EASY plug I2C 8x8 LED Matrix
  ...d into a crystal plug. All you need to do is connect the module to control board for communication using an RJ11 cable.<br> This module should be used with EASY plug control board.<br>
  3 KB (545 words) - 08:22, 8 January 2021
• Ks0138 keyestudio EASY plug I2C 2004 LCD
  ...tion, or readings from your sensor - all depending on how you program your board.<br> This module should be used together with EASY plug control board.
  3 KB (522 words) - 17:06, 7 January 2021
• Ks0164 keyestudio Xbee Sensor Shield V5 with RS485 BLUEBEE Interface
  Arduino is an open source controller board, popular among electronic enthusiasts for making interactive projects. But ...N GND terminal block, used to supply the external power for UNO R3 control board, with input voltage of DC 7-12V.<br>
  3 KB (484 words) - 10:43, 29 April 2021
• CZ0565 Keyestudio Start and development of electronics Arduino UNO Rev3 compatible
  == '''KEYESTUDIO UNO BOARD''' == keyestudio Uno R3 is a microcontroller board based on the ATmega328, fully compatible with ARDUINO UNO REV3. It has 14 d
  3 KB (480 words) - 10:11, 8 September 2023
• KS0535 Keyestudio Motor PLUS Development Board
  The Keyestudio Motor PLUS development board is a control board fully compatible with the Arduino IDE development environment. <br> It is as same as the UNO R3 board. In addition, we also made some improvements. <br>
  2 KB (312 words) - 16:22, 13 December 2022
• KS3031 Keyestudio SIM7600X 4G Shield Development Kit for Raspberry Pi
  ...aspberry Pi 40PIN GPIO interface, compatible with Raspberry Pi series main board and Arduino.<br>
  1 KB (193 words) - 10:30, 23 February 2023
• Ks0242 keyestudio EASY plug SR01 Ultrasonic Module
  This module should be used together with EASY plug control board.<br> ...plug Control Board with RJ11 6P6C interface. <br> If you have the control board of other brands, it is also equipped with the RJ11 6P6C interface but has d
  4 KB (549 words) - 08:35, 8 January 2021
• KS0016 Keyestudio White LED Module
  ...module to control board using three jumper wires. Then connect the control board to your PC with a USB cable.<br> ...assembled the circuit correctly and verified and uploaded the code to your board. <br>
  2 KB (316 words) - 09:08, 8 January 2021
• KS0516 Keyestudio Expansion Board+TF Card for Data Recording
  ...ing time for follow-up studies. Therefore, we have designed this expansion board to simplify this process.<br> ...UNO board possible.Furthermore, to facilitate its expansion function, the board is equipped with circular welding holes with spacing of 2.54mm.<br>
  5 KB (688 words) - 11:34, 13 December 2021
• KS3030 Keyestudio Raspberry Pi SIM7600X 4G Expansion Board
  ...aspberry Pi 40PIN GPIO interface, compatible with Raspberry Pi series main board and Arduino.<br>
  1 KB (195 words) - 09:08, 12 January 2023
• KS0546 Keyestudio 328 PLUS Development Board Compatible with Arduino R3(Black and eco-friendly)
  ...h Arduino IDE development environment. It is as same as the Arduino UNO R3 board. Moreover, some improvements we made highly strengthen its function(as show * On-board LED pin: D13
  2 KB (264 words) - 16:30, 3 August 2022
• KS0489 Keyestudio 4WD TB6612 Motor Driver Shield (Black and Eco-friendly)
  ...quired. We particularly design this driver board compatible UNO R3 control board. * 1.Design in stacked style, only need to stack on UNO R3 control board which save space and facilitate to connect.<br>
  5 KB (676 words) - 11:24, 22 January 2021
• KS0337 Keyestudio UNO Board + 400 Tie-Points Breadboard + Chassis + Breadboard Wire Pack of 65 + USB Cable
  [[File:0337-10.png|thumb|400px|right|Keyestudio REV4 Board + 400 Tie-Points Breadboard + Chassis + Breadboard Wire Pack of 65 + USB Ca This kit includes a keyestudio REV4 board, a transparent 400-hole breadboard, a black chassis, 65 pieces of breadboar
  4 KB (595 words) - 15:53, 9 March 2021
• Ks0232 keyestudio Red LED Module
  ...module to control board using three jumper wires. Then connect the control board to your PC with a USB cable.<br> ...assembled the circuit correctly and verified and uploaded the code to your board. <br>
  2 KB (324 words) - 08:49, 28 April 2021
• Ks0151 keyestudio CNC Shield V2
  To easily debug the operating mode of stepper motor driver board, there are 3 jumper caps under each pin slots. You can set the working mode ....keyestudio.com/index.php/Ks0001_keyestudio_UNO_R3_BOARD UNO R3 control board compatible ]
  4 KB (597 words) - 10:26, 29 April 2021
• Ks0020 keyestudio Hall Magnetic Sensor
  ...and upload well the code to board, you will see that D13 indicator on UNO board is off, and led on the module is also off. ...netic ball close to the hall module, you will see the D13 indicator on UNO board is turned on, and led on the module is also turned on.
  2 KB (290 words) - 14:39, 7 January 2021
• KS0440 Keyestudio Piano Shield for Micro:bit (Black and Eco-friendly)
  Keyestudio piano shield is fully compatible with the micro:bit development board. <br> ...it provides an easy way to connect other sensors/modules to micro:bit main board. <br>
  3 KB (455 words) - 10:23, 4 March 2021
• Ks0151 keyestudio A4988 3D printer stepper motor driver CNC shield V2
  To easily debug the operating mode of stepper motor driver board, there are 3 jumper caps under each pin slots. You can set the working mode ....keyestudio.com/index.php/Ks0001_keyestudio_UNO_R3_BOARD UNO R3 control board compatible ]
  4 KB (604 words) - 13:15, 14 August 2018
• KS0480 Keyestudio Micro bit Honeycomb Traffic Light Module
  ...board. In the experiment, we connect this module to the micro:bit control board using crocodile clip wire. There are 6 ports on the module, 3 GND ports are
  1 KB (183 words) - 09:45, 27 April 2021
• KS0508 Keyestudio PCF8591 AD Adapter Module
  ...nd output ports are needed when doing experiment with Raspberry Pi control board. Without analog ports on Raspberry Pi board, therefore, we design this adapter board to convert digital value into analog value.
  3 KB (466 words) - 16:30, 20 October 2021
• Ks0420 Keyestudio micro:bit Capacitive Touch Module
  ...estudio capacitive touch module is fully compatible with micro:bit control board. <br> When using, connect the module to micro:bit control board using Crocodile clip line. <br>
  3 KB (437 words) - 11:14, 4 March 2021
• KS0548A Keyestudio PLUS V2 Development Board
  ...h Arduino IDE development environment. It is as same as the Arduino UNO R3 board. Moreover, some improvements we made highly strengthen its function(as show * On-board LED pin: D13
  2 KB (260 words) - 11:48, 9 September 2022
• KS0402 (403, 404) KEYESTUDIO Basic Starter V2 Kit
  (Note: KS0402 kit with no board and USB cable; KS0403 kit with V4.0; KS0404 with 2560 MEGA R3) When we get control board, we need to download Arduino IDE and driver firstly.
  7 KB (1,054 words) - 15:40, 17 December 2020
• KS0370 EASY plug 2812 2x2 Full Color RGB Module (Black and Eco-friendly)
  You can easily connect it to EASY Plug control board for communication using a RJ11 cable.<br> ...plug Control Board with RJ11 6P6C interface. <br> If you have the control board of other brands, it is also equipped with the RJ11 6P6C interface but has d
  3 KB (473 words) - 08:45, 8 January 2021
• KS0412 keyestudio L298P Shield
  ...to drive the DC motors, however, sometimes need to connect the motor drive board to UNO using lots of jumper wires, pretty inconvenient.<br> Just simply stack the shield onto UNO board to power the shield and UNO board. The 3 kinds of power supply are as follows:<br>
  5 KB (682 words) - 12:00, 6 January 2021
• KS4018 Micro:bit Motor Driver Expansion Board
  The Micro:bit motor drive expansion board contains a PCA9685PW chip and a TB6612FNG chip and so on. In order to save * Weight (bare board): 41.8g
  1 KB (219 words) - 14:49, 5 August 2022
• FKS0001 Keyestudio ESP32 Inventor Starter Kit
  ...ple functions:Nano or ESP32 development board are available as the control board and 15 sensors are integrated. When the external power supply is connected, 3. Simple structure:Use 6mm dual-pass copper pillars to connect the acrylic board.<br>
  2 KB (334 words) - 14:50, 18 May 2023
• KS0393 EASY plug WIFI and Bluetooth Shield (Black and Eco-friendly)
  It is very easy to connect the shield to EASY Plug control board for communication using only an RJ11 cable. ...plug Control Board with RJ11 6P6C interface. <br> If you have the control board of other brands, it is also equipped with the RJ11 6P6C interface but has d
  4 KB (612 words) - 08:53, 8 January 2021
• Ks0060 keyestudio Large Button 4*4 Matrix Keypad for Arduino
  Connect module pin 1-8 in sequence to board digital pin 2-9, as below picture.<br> // connect row ports of the button to corresponding IO ports on the board
  3 KB (420 words) - 13:49, 2 March 2021
• KS0349 Keyestudio 48 in 1 Sensor Kit
  ...e also provide some detailed projects for each sensor based on development board, including wiring method, test code, etc. It can help you have further unde Note that in the following projects, the main board and other wires are not included in this kit. You need to prepare them by y
  7 KB (1,125 words) - 08:12, 19 November 2020
• Ks0160 keyestudio CNC Shield V3
  ...UNO_R3_BOARD UNO R3 ]. So you just need to stack it onto UNO R3 control board when using. <br> To easily debug the operating mode of stepper motor driver board, there are 3 jumper caps under each pin slots. You can set the working mode
  5 KB (692 words) - 10:40, 29 April 2021
• Ks0160 keyestudio A4988 3D printer stepper motor driver CNC shield V3
  ...UNO_R3_BOARD UNO R3 ]. So you just need to stack it onto UNO R3 control board when using. <br> To easily debug the operating mode of stepper motor driver board, there are 3 jumper caps under each pin slots. You can set the working mode
  5 KB (700 words) - 13:31, 14 August 2018
• Ks0112 keyestudio EASY plug Digital Push Button
  This sensor needs to be used together with EASY plug control board.<br> ...plug Control Board with RJ11 6P6C interface. <br> If you have the control board of other brands, it is also equipped with the RJ11 6P6C interface but has d
  3 KB (501 words) - 16:12, 7 January 2021
• KS0493 Keyestudio Micro bit Shield For Mini Servo Car
  This shield is fully compatible with micro bit control board. It comes with SK6812-P4 RGB LED and 4 3pin ports with 2.54mm pitch. ...ce 3 AAA batteries(not included) inside, and install the micro bit control board on the mini servo car shield with 5 M3*6MM screws.
  2 KB (311 words) - 10:49, 22 January 2021
• Ks0122 keyestudio EASY plug PIR Motion Sensor
  This module should be used together with EASY plug control board.<br> ...plug Control Board with RJ11 6P6C interface. <br> If you have the control board of other brands, it is also equipped with the RJ11 6P6C interface but has d
  3 KB (535 words) - 16:24, 7 January 2021
• Ks0107 keyestudio EASY plug Water Sensor
  ...plug Control Board with RJ11 6P6C interface. <br> If you have the control board of other brands, it is also equipped with the RJ11 6P6C interface but has d ...evel sensor to control board using an RJ11 cable. Then connect the control board to your PC with a USB cable.
  4 KB (574 words) - 15:57, 7 January 2021
• KS4025 Keyestudio Micro:bit V2 Board
  ...teenagers. In order to carry it conveniently, we put a micro: bit control board and two manuals in storage bag. The storage bag is light and beautiful. == On-board Resource ==
  3 KB (361 words) - 15:12, 30 April 2021
• KS0323 Keyestudio MEGA2560 Prototype Circuit Breakout Board PCB 10PCS
  This kit includes 10 PCS of keyestudio MEGA 2560 prototype circuit board PCB. <br> *Keyestudio MEGA 2560 Prototype Circuit Board * 10pcs
  2 KB (257 words) - 09:13, 27 April 2021
• Ks0137 keyestudio EASY plug 1602 I2C Module
  This module should be used together with EASY plug control board. ...plug Control Board with RJ11 6P6C interface. <br> If you have the control board of other brands, it is also equipped with the RJ11 6P6C interface but has d
  4 KB (716 words) - 17:04, 7 January 2021
• KS5001 ESP32-CAM Development Board WiFi+Bluetooth Module with OV2640 Camera (Black and Eco-friendly)
  Step 1: wire up the USB to serial module and the ESP32-CAM development board ...ntrol board.(USB cable can’t supply large current to drive the development board, thus, the external power more than 5V 500mA is needed.)
  6 KB (880 words) - 10:11, 7 January 2022
• Ks0024 keyestudio Knock Sensor Module
  ...r detects a knock signal, both the led on the sensor and led 13 on the UNO board are turned on.
  2 KB (242 words) - 14:45, 7 January 2021
• Getting Started with Arduino
  ...what to do by sending a set of instructions to the microcontroller on the board. To do so you use the Arduino programming language (based on Wiring), and t [https://www.arduino.cc/en/Main/Products The Arduino board ], which is the piece of hardware you work on when you build your objects.
  9 KB (1,505 words) - 09:13, 6 September 2018
• KS0438 Keyestudio 16-channel SERVO Shield for Micro:bit
  ...s generally need to drive with DC5V; the driving current of micro:bit main board is very small, it’s also not enough to use the IO pins to drive a bunch o ...t mainly integrates PCA9685PW chip, which communicates with micro:bit main board through I2C. <br>
  4 KB (608 words) - 15:17, 30 April 2021
• KS0372 EASY plug Servo Module +Micro Servo
  If you want to use the Micro Servo and EASY PLUG control board to make experiments, you need to use the EASY plug Servo extension module. ...plug Control Board with RJ11 6P6C interface. <br> If you have the control board of other brands, it is also equipped with the RJ11 6P6C interface but has d
  4 KB (657 words) - 08:46, 8 January 2021
• KS5014 Keyestudio 2560 WIFI PLUS Main Control Board
  ...8266, containing all functions of Arduino Mega 2560and ESP8266 development board. The two MCU combination is suitable for the development of the Internet of
  1 KB (233 words) - 11:54, 17 February 2023
• KS0521 Keyestudio Solar Charger Shield (Black and Eco-friendly)
  ...r management and charging, a stacked shield compatible with UNO R3 control board. <br> ...to ON end, either external batteries or USB port supplies power to UNO R3 board.<br>
  4 KB (645 words) - 13:22, 7 May 2021
• FKS0002 Keyestudio Nano Inventor Starter Kit
  ...ions:''' Nano or ESP32 development board are both available as the control board; 15 sensors are integrated; The VCC of 3.3V/5V can be adjusted via DIP swit | 1 || [[File:Wps1.jpg|600px|frameless]] || Keyestudio Expansion Board || 1
  3 KB (477 words) - 13:59, 19 May 2023
• Ks0282 Keyestudio 3D MKS Gen V1.4 Printer Motherboard Control Board(Black &Environmental-protection)
  ==Keyestudio 3D MKS Gen V1.4 Printer Motherboard Control Board== ...solutionof the RAMPS 1.4 and Arduino Mega 2560 board on a fantastic single board. <br>
  8 KB (1,268 words) - 15:18, 7 January 2021
• KS0486 Keyestudio PLUS Development Board (Black And Eco-friendly)
  ...velopment environment. It contains all the functions of the Arduino UNO R3 board. Moreover, some improvements we made highly strengthen its function(as sho * On-board LED pin: D13
  7 KB (1,133 words) - 15:48, 27 July 2022
• Ks0021 keyestudio Collision Sensor
  ...n 3, when the collision sensor senses a collision signal, the LEDs on main board and module will light up simultaneously. Wire it up well and then upload the code to the board.
  2 KB (376 words) - 14:41, 7 January 2021
• Ks0308 keyestudio Motor Drive Breakout Board for micro bit
  ...th your BBC micro:bit? Unlock its potential with this motor drive breakout board for the BBC micro:bit! <br> The motor drive breakout board integrates TB6612FNG chip. Its per channel can output up to 1.2 A continuou
  5 KB (715 words) - 11:07, 27 April 2021
• Ks0423 keyestudio micro:bit Microphone Module
  This keyestudio microphone module is fully compatible with micro:bit control board. It is a sound detection device, an analog signal output device.<br> When using, connect the module to micro:bit control board using Crocodile clip line.
  3 KB (423 words) - 11:02, 4 March 2021
• MB0102 Keyestudio Microbit Main Board +USB Cable+Battery Holder with Batteries
  <br>And this basic starter kit which includes a micro: bit control board, 1m USB cable and a battery holder (2 AAA batteries included, wire length 1 == On-board Resource ==
  3 KB (402 words) - 16:44, 2 July 2021
• MB0110 Micro:bit Main Board+USB Cable+Battery Holder with Batteries
  <br>And this basic starter kit which includes a micro: bit control board, 1m USB cable and a battery holder (2 AAA batteries included, wire length 1 == On-board Resource ==
  3 KB (402 words) - 15:46, 23 September 2022
• Ks0421 Keyestudio micro:bit TEMT6000 Light Module
  ...eyestudio TEMT6000 light module is fully compatible with micro:bit control board. <br> When using, connect the module to micro:bit control board using Crocodile clip line.<br>
  3 KB (411 words) - 11:06, 4 March 2021
• KS0393 keyestudio WIFI and Bluetooth Shield (Black and Eco-friendly)
  It is very easy to connect the shield to EASY Plug control board for communication using only an RJ11 cable. Upload the test code to EASY plug Control board V2.0, in the code, set the AT command.<br>
  4 KB (528 words) - 13:20, 4 March 2021
• Ks0260 keyestudio TTP229L 16-key Touch Sensor
  After uploading the code to the UNO board, connect the UNO board to TTP229L module. <br>
  2 KB (261 words) - 14:34, 7 January 2021
• KS0503 Keyestudio PRO MICRO 5V 16MHZ Development Board(Black and Eco-friendly)
  ...age:0503-1.png|thumb|600px|right|Keyestudio PRO MICRO 5V 16MHZ Development Board ]] The processor core of Keyestudio PRO MICRO development board is ATMEGA32U4-MU, fully compatible with ARDUINO.<br>
  7 KB (1,100 words) - 09:10, 9 April 2021
• KS0499 KEYESTUDIO Mega 2560 Plus Board
  KEYESTUIDO Mega 2560 plus Board, whose processor core is ATMEGA2560-16AU, is fully compatible with ARDUINO This plus board consists of 54-channel digital input and output ports, of which 15 pins are
  6 KB (920 words) - 08:50, 30 April 2021
• Ks0007 keyestudio L298P Motor Shield
  ...to drive the DC motors, however, sometimes need to connect the motor drive board to UNO using lots of jumper wires, pretty inconvenient.<br> ...yestudio motor shield with L298P as core. Just simply stack it onto UNO R3 board when using. Note that the motor’s speed and direction interfaces have bee
  4 KB (601 words) - 10:18, 29 April 2021
• Ks0007 Shield L298P 2A High Current Dual DC Motor Driver Module
  ...to drive the DC motors, however, sometimes need to connect the motor drive board to UNO using lots of jumper wires, pretty inconvenient.<br> ...yestudio motor shield with L298P as core. Just simply stack it onto UNO R3 board when using. Note that the motor’s speed and direction interfaces have bee
  4 KB (614 words) - 15:39, 14 September 2018
• Ks0155 keyestudio USB Host v1.5 shield
  ...V1.5 is an add-on board for Arduino USB Host. Directly plug it to Arduino board and it will allow Arduino to have USB Host function. Arduino with host func ...x.php/Ks0002_keyestudio_Mega_2560_R3_Development_Board MEGA 2560 control board].
  4 KB (662 words) - 14:59, 6 January 2021
• Ks0011 keyestudio 5V Relay Module
  The modular design makes it easy to expand with the Arduino board (not included). The relay output is by a light-emitting diode. It can be co * Arduino Board*1
  3 KB (362 words) - 10:10, 8 January 2021
• KS0482 Keyestudio Micro bit Power Shield (Black and Eco-friendly)
  ...yestudio micro bit power shield is fully compatible with micro bit control board. It can provide power for micro bit. The micro bit is easily fixed on the s ...the DIP switch to the ON end. The LED dot matrix of the micro bit control board displays a heart pattern. After the passive buzzer plays the happy birthday
  2 KB (249 words) - 15:11, 30 April 2021
• Ks0243 keyestudio EASY plug W5100 Ethernet Module
  ...hould be connected to the SPI communication interface on EASY plug control board with only one cable, so the wiring is rather simple. ...plug Control Board with RJ11 6P6C interface. <br> If you have the control board of other brands, it is also equipped with the RJ11 6P6C interface but has d
  4 KB (591 words) - 08:36, 8 January 2021
• Ks0089 MKS BaseV1.2 3D Printer Controller Board (RAMPS 1.4 + Arduino 2560 Remix Board)
  ==MKS BaseV1.2 3D Printer Controller Board (RAMPS 1.4 + Arduino 2560 remix board)== ...assets of the RAMPS 1.4 and Arduino Mega 2560 boards on a fantastic single board solution. The MKS Base 1.2 is an optimal 3D printer controller solution for
  7 KB (1,177 words) - 15:07, 7 January 2021
• KS0376 EASY plug SR01 Ultrasonic Module V2
  Note that this module matches with EASY plug control board. ...plug Control Board with RJ11 6P6C interface. <br> If you have the control board of other brands, it is also equipped with the RJ11 6P6C interface but has d
  4 KB (585 words) - 08:49, 8 January 2021
• KS5003(KS5003F)KS5004(KS5004F) Keyestudio ESP32 42 in 1 Sensor Kit
  ...ontains 42 commonly used sensors/modules, a ESP32 board, a ESP32 expansion board and Dupont wires.<br> ...Board. You only need to stack the ESP32 mainboard onto the ESP32 Expansion Board, and hook up them with Dupont wires, which is simple and convenient.<br>
  4 KB (496 words) - 08:27, 28 April 2022
• KS3023(3023F) Keyestudio Raspberry Pi Pico 37 in 1 Sensor Kit
  ...sors/modules, the Raspberry Pi Pico board, the Raspberry Pi Pico expansion board and Dupont wires.<br> ...the Raspberry Pi Pico shield. You only need to stack the Raspberry Pi Pico board onto the Raspberry Pi Pico shield, and hook up them with Dupont wires, whic
  3 KB (431 words) - 15:19, 20 March 2023
• Ks0254 keyestudio Sim800c Shield
  This is a GPRS/GSM expansion board for Arduino. <br> 1.Burn the above code onto keyestudio V4.0 board, stack shield on it, and connect SIM card(support 2G internet), Ethernet ca
  6 KB (899 words) - 14:14, 6 January 2021
• KS0390 EASY plug I2C Interface Conversion Shield (Black and Eco-friendly)
  We use EASY plug Control board V2.0 and I2C shield to control five EASY plug 8x8 matrix modules (selectabl Or you can use UNO Control board and I2C shield to control four keyestudio 8x8 matrix modules (selectable ad
  2 KB (304 words) - 11:07, 29 April 2021
• Ks0005 keyestudio MEGA ProtoShield V3 with Tiny Breadboard
  ...sily solder SMD ICs on the prototyping area to test them with your Arduino board. <br> * Can be plugged into the MEGA 2560 control board
  3 KB (446 words) - 10:16, 29 April 2021
• XC4431 Leonardo Tiny Dev Board
  ...1 Tiny Leonardo is as the name suggests, a smaller version of the Leonardo board, sporting a 32u4 ATMEL processor with a 16MHz clock and some interesting zi ...t also has ICSP, i2c, and Serial1 port contained on the bottom side of the board, which will have to be soldered onto; these could also be used as digital p
  2 KB (310 words) - 09:59, 15 May 2023
• SMP0093 Raspberry Pi Pico Board
  Raspberry Pi Pico is the low-cost and highly performed development board with digital ports. * 264kB of SRAM, and 2MB of on-board Flash memory
  1 KB (218 words) - 09:33, 22 November 2021
• Ks0251 keyestudio 4-channel Relay Shield
  ...connect the 4-channel relay to the digital port 4, 5, 6, 7 on the UNO R3 board, then through controlling output HIGH or LOW to control the relay on and of * Fully compatible with UNO R3 board
  4 KB (670 words) - 14:00, 6 January 2021
• Ks0253 keyestudio GPS Shield
  ...dule, and those pins are also compatible with UNO R3 and MEGA 2560 control board. <br> In particular, this expansion board can only be positioned outdoors and cannot be used for indoor positioning.
  5 KB (742 words) - 14:11, 6 January 2021
• KS0575 Keyestudio 4x4x4 RGB CUBE
  === Q: An error occurs when the board is burning code. === 2. Please check whether you choose the correct board.
  4 KB (579 words) - 09:36, 27 September 2023
• KS0198 Keyestudio 4DOF Robot Mechanical Arm Kit for Arduino DIY
  ...In fact, the four servos of this robot arm are controlled by V4.0 control board and two joystick modules. What’s more, the detailed tutorials are provide The parameters of keyestudio TB6612FNG motor/servo drive expansion board are as follows:
  11 KB (1,618 words) - 14:13, 1 November 2021
• Ks0491 Keyestudio Micro bit Honeycomb Photoresistor
  ...cro bit honeycomb photoresistor is fully compatible with micro bit control board. In the experiment, we connect it with the micro: bit by a crocodile clip. ...During the test, we test the analog value of S end via micro: bit control board. The brighter the light is, the larger the analog value is, the darker the
  2 KB (293 words) - 10:56, 22 January 2021
• KS0381 EASY plug I2C 1602 LCD Module-180° Interface
  It is very easy for you to connect the module to control board for communication using only an RJ11 cable ...plug Control Board with RJ11 6P6C interface. <br> If you have the control board of other brands, it is also equipped with the RJ11 6P6C interface but has d
  3 KB (464 words) - 08:50, 8 January 2021
• KS0395 EASY plug 8x8 LED Matrix Module Address Select
  All you need to do is connecting the module to control board for communication using an RJ11 cable.<br> ...plug Control Board with RJ11 6P6C interface. <br> If you have the control board of other brands, it is also equipped with the RJ11 6P6C interface but has d
  5 KB (678 words) - 08:56, 8 January 2021
• Download Mixly Software
  Next, we will take our EASY Plug control board as an example: Connect the control board to your computer via a micro USB cable.
  6 KB (928 words) - 18:21, 23 June 2020
• KS0406 keyestudio RS232 to TTL Conversion Shield Compatible with Arduino
  The RS232 to TTL conversion shield is specially designed for UNO R3 control board, very convenient to change the serial port into RS232 interface.<br> Stack the shield onto UNO R3 board, and connect the UNO R3 control board to your computer using a USB cable. Then connect the shield with RS232 seri
  3 KB (449 words) - 11:54, 6 January 2021
• KS0562F Keyestudio Student Starter Learning Kit with Mainboard
  ...used to create some interesting projects based on the Arduino development board, such as LED flash, ...in a way that helps you better understand these components and the Arduino board. In addition, you can master the use of
  2 KB (313 words) - 15:55, 29 March 2023
• Ks0104 keyestudio EASY plug Analog Temperature Sensor
  This module should be used together with EASY plug control board.<br> ...plug Control Board with RJ11 6P6C interface. <br> If you have the control board of other brands, it is also equipped with the RJ11 6P6C interface but has d
  4 KB (614 words) - 10:16, 7 August 2020
• How to Import Mixly Library
  Next, we will take our EASY Plug control board as an example: Connect the control board to your computer via a micro USB cable.
  6 KB (934 words) - 11:48, 22 July 2020
• Electronic Scale Kit
  * 2.This product contains conductive parts (control board and electronic module). Please operate according to the requirements of tut * 3. Novel style：Adopt strong wood board, acrylic board, RGB and LCD 1602 modules.
  3 KB (464 words) - 09:44, 13 April 2021
• KS0380 EASY plug 8x8 LED Matrix Module -180° Interface
  All you need to do is connecting the module to control board for communication using an RJ11 cable.<br> ...plug Control Board with RJ11 6P6C interface. <br> If you have the control board of other brands, it is also equipped with the RJ11 6P6C interface but has d
  4 KB (597 words) - 08:51, 8 January 2021
• KS0431 EASY plug DHT22 Temperature and Humidity Sensor
  ...tal socket, so that you can direct connect the sensor to EASY plug control board using only an RJ11 cable for communication.<br> ...plug Control Board with RJ11 6P6C interface. <br> If you have the control board of other brands, it is also equipped with the RJ11 6P6C interface but has d
  4 KB (586 words) - 08:58, 8 January 2021
• KS0468 Keyestudio Storage Bag Micro:bit Main board Kit
  [[image:0468-1.png|thumb|900px|right|Keyestudio PRO MICRO Development Board ]] In order to carry it conveniently, we put a micro: bit control board and two manuals in storage bag. The storage bag is light and beautiful.
  4 KB (542 words) - 09:03, 27 April 2021
• Download Arduino IDE and Install Driver
  ...rduino Software (IDE) allows you to write programs and upload them to your board. In the Arduino Software page you will find two options: Choose your board in the list here on the right to learn how to get started with it and how t
  7 KB (1,170 words) - 14:35, 21 May 2018
• KS0352 Keyestudio KEYBOT Programmable Robot 3-way Line Tracking Sensor
  ...e-way tracking sensor needs to be used together with the EASY plug Control board V2.0. The module is connected to the SPI interface with only one wire, whic ...cm. We have integrated three groups of TCRT5000 infrared tubes on a single board, more convenient for wiring and control. By rotating the adjustable resista
  4 KB (560 words) - 11:10, 28 April 2021
• KS0550 Keyestudio Servo Driver Expansion Board(Black and Eco-friendly)
  Stack the driver board onto the control board, wire up and upload the code. Four servos rotate from 0° to 180°, then fr
  2 KB (280 words) - 13:55, 23 May 2022
• KS5016 Keyestudio ESP32 PLUS Development Board
  This is a universal WIFI plus Bluetooth development board based on ESP32, integrated with ESP32-WOROOM-32 module and compatible with ...efer to the file Get Started with Arduino to install the ESP32 development board driver and Arduino IDE as well as the ESP32 development environment.
  2 KB (335 words) - 08:31, 21 June 2023
• Download Arduino and Install Arduino Driver
  ...rduino Software (IDE) allows you to write programs and upload them to your board. In the Arduino Software page you will find two options: Choose your board in the list here on the right to learn how to get started with it and how t
  6 KB (888 words) - 10:28, 21 May 2018
• KS0492 Keyestudio Micro bit Honeycomb Hall Magnetic Sensor (Black and Eco-friendly)
  ...honeycomb hall magnetic sensor is fully compatible with micro bit control board. In the experiment, we connect it with the micro: bit by a crocodile clip. During the test, we test the analog value of S end via micro: bit control board. The analog value read is decreasing fast when the nearby magnetic field is
  2 KB (313 words) - 10:53, 22 January 2021
• KS0310 Keyestudio Traffic Light Module (Black and Eco-friendly)
  ...https://wiki.keyestudio.com/Ks0001_keyestudio_UNO_R3_BOARD keyestudio UNO board] Connect the traffic light module to UNO board, R pin to Digital 5, Y pin to Digital 4, G pin to Digital 3, GND to GND.<br
  4 KB (488 words) - 11:17, 4 July 2022
• KS0437 EASY Plug Shield for Micro:bit V1.0
  ...g Shield for micro:bit V1.0. It’s pretty easy to insert the micro:bit main board into the EASY Plug Shield for DIY experiments. <br> ...lug Shield comes with 4 WS2812 LEDS, controlled by P9 on micro:bit control board; a Passive buzzer controlled by P0. <br>
  6 KB (988 words) - 09:26, 20 November 2019
• Ks0029 keyestudio Digital Push Button
  /* # When you push the digital button, the Led 13 on the board will turn on. Otherwise,the led turns off. When you push the digital button, the Led 13 on UNO board will be on. When release the button,the led is off. Shown as below.
  2 KB (321 words) - 14:49, 7 January 2021
• KS5014 Keyestudio 2560 WIFI PLUS Main Board
  ...8266, containing all functions of Arduino Mega 2560and ESP8266 development board.<br> <br> | Esp8266 Digital I/O || 9 on-board pin
  7 KB (1,139 words) - 11:53, 17 March 2023
• Ks0093 Keyestudio 3D Printer Kit MKS base V1.2 + 5x 8825 + LCD 12864 smart Controller
  ...assets of the RAMPS 1.4 and Arduino Mega 2560 boards on a fantastic single board solution. The MKS Base 1.2 is an optimal 3D printer controller solution for It contains a SD-Card reader. You can easy connect it to your Ramps board using the ""smart adapter"" included. After connecting this panel to your R
  8 KB (1,266 words) - 15:14, 7 January 2021
• KS0542 Keyestudio LY51M02 Bluetooth 5.0 Module
  # Antenna connection method: PCB on-board antenna ...erted into the UNO board, otherwise the code cannot be uploaded to the UNO board.
  3 KB (426 words) - 10:30, 7 April 2022
• KS0149 Keyestudio RAMPS1.4 / 12864 LCD Control Panel for 3D Printer
  '''Note: This product needs work with adapter board and connection wire.
  804 bytes (127 words) - 10:37, 28 April 2021
• KS0345 Electronic Scale Kit
  * 2.This product contains conductive parts (control board and electronic module). Please operate according to the requirements of tut * 3. Novel style：Adopt strong wood board, acrylic board, RGB and LCD 1602 modules.
  4 KB (514 words) - 10:19, 21 December 2021
• KS0335 Keyestudio PIR Motion Sensor 3PCS
  Connect the S pin of module to Digital 3 of UNO board, connect the negative pin to GND port, positive pin to 5V port. ...he code, if the sensor detects someone moving nearby, D13 indicator on UNO board will light up, and "Somebody is in this area!" is displayed on the serial m
  3 KB (460 words) - 15:18, 22 November 2021
• KS0327 Keyestudio Stepper Motor Drive Board + 5V Stepper Motor Kit (3PCS)
  == Stepper Motor Drive Board + 5V Stepper Motor (3PCS) == Stepper motor driver board mainly adopts ULN2003 chip. It is a seven-fold Darlington array. This circu
  6 KB (899 words) - 16:08, 9 March 2021
• Ks0255 keyestudio Bluetooth 4.0 Expansion Shield
  ...lly compatible with UNO R3. So it is very easy to stack it onto the UNO R3 board.<br> ...rt. If connect two jumpers, need to set the virtual serial port for UNO R3 board, that is D2 to TX, D3 to RX.<br>
  4 KB (537 words) - 14:16, 6 January 2021
• Ks0315 Keyestudio SK6812 4x8 LED Matrix Shield for BBC micro bit
  ...comes with two 3.3V regulator chips, one powers for the micro bit control board, the other powers for 32 SK6812 LED lights. ...9V to the shield. You can upload the control code to the micro:bit control board, then insert the micro:bit into the shield, and supply DC5-9V power voltage
  5 KB (748 words) - 11:11, 27 April 2021
• Ks0092 keyestudio 3D Printer Kit MKS Base V1.2 + 5x 8825 + LCD 2004 Smart Controller
  ...assets of the RAMPS 1.4 and Arduino Mega 2560 boards on a fantastic single board solution. The MKS Base 1.2 is an optimal 3D printer controller solution for ...a 20 Character x 4 Line LCD display. You can easy connect it to your Ramps board using the "smart adapter" included. After connecting this panel to your Ram
  8 KB (1,302 words) - 15:12, 7 January 2021
• KS0478 Keyestudio Micro:bit Honeycomb Dot Matrix Module (Black and Eco-friendly)
  ...rix module is a sensor that is fully compatible with the micro:bit control board. This module uses an HT16K33 chip to drive an 8 * 8 dot matrix and controls ...ferent patterns by setting the corresponding code on the micro:bit control board.
  5 KB (487 words) - 09:34, 27 April 2021
• Ks0256 keyestudio LCD1602 Expansion Shield
  ...[http://wiki.keyestudio.com/index.php/Ks0001_keyestudio_UNO_R3_BOARD UNO board ]. <br> There are two communication methods for 1602 LCD display and UNO R3 board, separately the 8-Bit connection and 4-Bit connection. <br>
  5 KB (810 words) - 14:19, 6 January 2021
• KS0399(400, 401) Keyestudio 37 in 1 Sensor V2.0 Kit for Arduino
  <span style=color:red>(Note: KS0399 kit with no board; KS0400 kit with V4.0 R3; KS0401 with 2560 MEGA R3)</span> When we get control board, we need to download Arduino IDE and driver firstly.
  9 KB (1,534 words) - 15:37, 17 December 2020
• KS0095 KEYESTUDIO CNC Kit V3.0
  Keyestudio CNC Shield V3.0 can be used as driver expansion board for engraving machines . It has in total 4 channel slots for A4988 stepper * GRBL 0.8c compatible. (Open source firmware that runs on a keyestudio V4.0 board that turns G-code commands into stepper signals)
  12 KB (1,816 words) - 14:13, 25 November 2020
• Ks0177 keyestudio RGB LED CUBE KIT
  ...ntroller board is based on an Arduino-compatible 8*8 LED RGB Matrix driver board. <br> ...witch must be set to Header terminal, or else it will burn out the control board; if set to Terminal terminal, external power only can accept 5V.'''
  13 KB (2,006 words) - 13:57, 4 December 2019
• KS0509 Keyestudio Mega 2560 Smart Development Board
  ...TMEGA2560-16AU which is compatible with the Arduino MEGA 2650 development board. Integrated with 2 TB6612 motor driving chips, this processor can be served <br>In addition, the output power supply of this board can reach the maximum 5V 3A, in 3 channels (good heat dissipation).Through
  10 KB (1,692 words) - 15:20, 28 December 2021
• KS0547 Keyestudio NANO PLUS Development Board Compatible with Arduino NANO(Black and Eco-friendly)
  ...D indicator（RX）|| Onboard you can find the label: RX(receive )when control board communicates via serial port, receive the message, RX led flashes. When control board communicates via serial port, send the message, TX led flashes.
  10 KB (1,663 words) - 09:51, 20 March 2023
• KS0389 keyestudio ESP8266 WiFi Development Board
  [[image:ks0389.png|thumb|500px|right|Keyestudio ESP8266 WiFi board]] This keyestudio ESP8266 WI-FI development board is based on the ESP8266-12FWIFI module developed by Ai-Thinker. <br>
  10 KB (1,606 words) - 10:13, 6 January 2021
• KS0520 KEYESTUDIO 4DOF Mechanical Robot Arm Car Learning Kit
  When we get control board, we need to download Arduino IDE and driver firstly. We need to know keyestudio V4.0 development board, as a core of this smart car.
  9 KB (1,379 words) - 08:21, 29 April 2021
• KS0150 Keyestudio RAMPS1.4 / 2004 LCD Control Panel for 3D Printer
  Note: This product needs to work with connection lead and adapter board. <br>
  917 bytes (140 words) - 10:40, 28 April 2021
• Ks0153 keyestudio JoyStick Shield
  * Compatible with UNO R3 and MEGA 2560 control board. Stack well the shield onto UNO R3 board, slide the switch to 5V.
  5 KB (654 words) - 10:31, 29 April 2021
• KS0367 keyestudio ESP8266 WiFi Board
  [[image:Ks0367-.png|thumb|500px|right|Keyestudio ESP8266 WI-FI Board (Black and Eco-friendly)]] This keyestudio ESP8266 WI-FI development board is based on the ESP8266-12FWIFI module developed by Ai-Thinker. <br>
  11 KB (1,725 words) - 10:11, 6 January 2021
• Ks0033 keyestudio Analog Temperature Sensor
  ...hange in its surrounding and send the data to the analog IO in the Arduino board. <br> ...by using the following equation. Then upload the code below to the Arduino board. The value read from the serial port is similar to normal temperature. <br>
  3 KB (382 words) - 14:51, 7 January 2021
• KS0523 KEYESTUDIO 4WD Mechanical Robot Arm Smart Car
  When we get control board, we need to download Arduino IDE and driver firstly. We need to know keyestudio V4.0 development board, as a core of this smart car.
  9 KB (1,406 words) - 17:18, 13 July 2021
• KS0455 keyestudio HM-10 Bluetooth-4.0 V3 Compatible with HC-06 Pins
  You are supposed to upload the code to control board, then connect the Bluetooth module. </span><br> After wiring, upload the test code to UNO R3 board and then connect the Bluetooth module. Powered on, Bluetooth module’s bui
  5 KB (790 words) - 15:03, 20 October 2021
• Ks0143 keyestudio XBee Bluetooth Wireless Module HC-05
  It comes with efficient on-board antenna. The exposed antenna ensures better signal quality and longer trans Stack it onto the board
  2 KB (336 words) - 10:46, 8 January 2021
• KS0094 KEYESTUDIO CNC Kit V2.0
  Keyestudio CNC Shield V2.0 can be used as driver expansion board for engraving machines . It has in total 3 channel slots for A4988 stepper 2. GRBL 0.8c compatible. (Open source firmware that runs on an Arduino V4.0 board that turns G-code commands into stepper signals)
  12 KB (1,837 words) - 14:47, 25 November 2020
• KS0474 Keyestudio GAMEPI DIY Game Console learning Kit for Arduino
  | 1 ||Keyestudio GAMEPI game console learning board|| 1 || [[File:0474-1-1.png|80px|frameless|thumb]] (2)Fix the keyestudio GAMEPI game board and acrylic top board together with 4 M2*10MM round-head screws, 4 white insulating column, and 4
  6 KB (919 words) - 11:32, 21 February 2023
• KS0564 Keyestudio Motion Sensing Glove Gesture Control Smart Car for Arduino
  ...eral modules together. And extra modules can be connected to the expansion board for easier control.<br> 3. Strong extensibility: It can attach additional sensors on the expansion board with commonly used interfaces.<br>
  3 KB (445 words) - 09:03, 20 March 2023
• Ks0424 keyestudio micro:bit Passive Buzzer Module
  When using it, you need to connect it to a micro:bit control board through crocodile clip lines.<br> Connect well the module, then send the source code to the micro:bit main board.<br>
  3 KB (417 words) - 16:33, 30 June 2021
• KS0320 Keyestudio Electromagnet Module (Black and Environmental-friendly)
  ...r supply, connect the SIG pin of the module to the PWM port of the arduino board, set the PWM value, and adjust the magnetic field of the module. The larger Connect up this module and UNO board like this: SIG pin to Digital port 3, VCC pin to 5V, GND pin to the ground
  4 KB (529 words) - 11:41, 25 March 2021
• 055251 Nano FT232 Starter Kit
  Compatible with the Arduino development platform, the Nano control board belongs to the Arduino series Nanocontroller. ...ake you have a better understanding with these components and Nano control board, we will also provide some learning courses based on the Arduino, like wiri
  11 KB (1,545 words) - 15:34, 6 May 2020
• KS3027(KS3027F) Keyestudio Beetlebot 3 in 1 Robot for Raspberry Pi Pico
  ...patibility: reserve ports for the Arduino Nano board and the ESP32 control board
  3 KB (400 words) - 17:37, 12 December 2022
• KS0502 Keyestudio MEGA 2560 PRO Development Board(Black and Eco-friendly)
  The mega 2560 control board, among the series of MCUs , is the most popular since it has numerous pins. ...development board. In fact, its use method is as same as the official mega board, in addition to the different volume.
  10 KB (1,563 words) - 10:13, 30 April 2021
• KS0473 EASY Plug TCS34725 Color Sensor(Black and Eco-friendly)
  ...e a special telephone line (RJ11 crystal head) to connect with the control board.<br>
  3 KB (521 words) - 09:02, 8 January 2021
• Ks0052 keyestudio PIR Motion Sensor
  Connect the S pin of module to Digital 3 of UNO board, connect the negative pin to GND port, positive pin to 5V port. ...he code, if the sensor detects someone moving nearby, D13 indicator on UNO board will light up, and "Somebody is in this area!" is displayed on the serial m
  4 KB (556 words) - 14:15, 7 January 2021
• Ks0354 Keyestudio ESP8266 WI-FI Development Board
  [[image:KS0354.png|thumb|500px|right|Keyestudio ESP8266 WI-FI Development Board]] This keyestudio ESP8266 WI-FI development board is based on the ESP8266-12FWIFI module developed by Ai-Thinker. <br>
  11 KB (1,749 words) - 14:53, 17 November 2021
• KS0533 Keyestudio Max Board
  The UNO MAX main control board uses a Atmega328p main control chip, and integrates a CP2102 USB to serial This board boasts a Type-C USB socket and a four-position DIP switch.
  2 KB (360 words) - 13:37, 6 June 2022
• KS0444 Keyestudio 6812 Full-color RGB LED Ring Shield for Micro:bit
  ...ll-color RGB LED Ring Shield is fully compatible for Micro:bit development board. It integrates 26 6812 Full-color RGB LEDS, a microphone and a passive buzz ...ng holes (wiring terminal), so easy to mount or connect the micro:bit main board to the shield using included 5 screws and 5 nuts. <br>
  4 KB (586 words) - 10:08, 4 March 2021

View (previous 250 | next 250) (20 | 50 | 100 | 250 | 500)